Tag: ultimaker

Display Case

Today we printed a Raspberry Pi 7 Inch touch screen display case. For this we used our woodFill and bambooFill. Designed by luc_e, it is a perfect showcase for some truly beautiful materials like our special filaments.

Design: http://www.thingiverse.com/thing:1585924

Ever since launching at the London 3D Print Show in 2013 woodFill has been a great success. Our first special filament, it was followed by bambooFill and corkFill in our range of aesthetically stunningly beautiful filaments. Printing with these materials makes your room smell like a wood shop! Both woodFill and bambooFill work on most printers that can handle PLA. You can find a tutorial here.

These parts were printed on an Ultimaker 2 at 0.16mm layer height.

Both woodFill and bambooFill are available in our webshop are are part of our line-up of special filaments.

3d printing bamboofill colorfabb pi raspberry specials ultimaker woodfill

Mirror holder

Sometimes you need a practical item for in and around the house. Like when you need a holder to hold the mirror. Luckily there is 3D printing. With a custom design we printed two mirror holders with XT-CF20.

We introducted XT-CF20 early 2015, containing 20% carbon fibres with colorFabb_XT.

Due to the abrasive nature of XT-CF20 we always used hardened steel nozzles to print this filament. In recent weeks, however, we have been extensively testing with the Olsson Ruby nozzle, provided to us by 3DVerkstan, our distributor in the Nordic region and producer of these new nozzles. You can find the Death Gun mask here and Robot Action figure here for examples printed with this new nozzle that will be released later in November. For further information, you can contact 3DVerkstan.

During our test printing the mirror holders we have seen quite some benefits over the regular brass nozzles that are the current industry standard: The ruby nozzle retains the excellent heat conducting properties of brass, while being extremely resistant to wear. This means that you can print your standard materials as usual, but also very abrasive materials such as XT-CF20 and steelFill.

As you can see we have had fantastic results with this new nozzle which, combined with the stiffness of the material, offer great functionality in everyday use. We printed the mirror holders on an Ultimaker 2 at 0.2mm layer height.

XT-CF20 is available now in our webshop (and take advantage of the colorfabb4you discount code to celebrate our fourth anniversary!)

3d printing colorfabb mirror holder nozzle The Olsson Ruby ultimaker xt-cf20

Toyota Corolla

We don’t only print big cars (like, for instance, the F1 car), but also smaller ones, like this Toyota Corolla AE86 toy car (which measures 12cm). For this print we used nGen Black and Gray Metallic.

Design: click here.

Inspired by the anime series Initial D and modelled by Jurica Pranjic it has a drif bodykit and Work Meister S1 Wheels. You can find Jurica’s full portfolio on MyMiniFactory.

nGen was released late last year as our second Amphora based co-polyester from Eastman Chemical Company, after succesfully launching colorFabb_XT in 2014. Since then, we have also launched the high temperature resistant colorFabb_HT and recently the semi-flexible nGen_FLEX.

nGen is a perfect all-round material to make prototypes, big and small, For toys we need materials with great colors and good stable mechanical properties. nGen comes in 17 great and carefully selected colors . Because of nGen’s good mechanical properties parts will last a long time.

This print was made on the Ultimaker 2 with a 0.1mm layer height.

nGen is a low-odor, styrene-free material uniquely suited for 3D printing enthusiasts, particularly those who need the flexibility to print within a wide processing temperature range. With nGen you will have good flow properties through the printer nozzle—even at lower temperatures than some other polymers require. These properties make nGen more workable at a wider breadth of temperatures, producing reliable results and resulting in less waste.

You can find more information about nGen, based on Eastman Amphora AM3300, on our dedicated nGen landing page.

nGen is now available in our webshop and through our worldwide network of distributors and resellers.

3d printing colorfabb ngen toy toyota ultimaker

Dodecahedron with XT-CF20

A few weeks ago we printed a Rhombic Dodecahedron Derived Figure with nGen Light Blue. You can find the original post here. We use this model, made by Fred Bartels, a lot lately to test our filaments with. The print we want to share today is the same dodecahedron, but printed with XT-CF20.

Design by Fred Bartels: http://www.thingiverse.com/thing:539489

We introducted XT-CF20 early 2015, containing 20% carbon fibres with colorFabb_XT.

As you can see we have had fantastic results with this new nozzle.

We printed the dodecahedron on an Ultimaker 2 at 0.1mm layer height.

XT-CF20 is available now in our webshop.

3d printing colorfabb design dodecahedron fred bartels nozzle olsson ultimaker xt-cf20

Death Gun (Desu Gan) masks with XT-CF20

It was time for a comparison print. With Halloween coming up we chose the Death Gun (Desu Gan) mask from ferreusveritas. The material we used is our XT-CF20, colorFabb_XT with 20% carbon fibre added.

The big mask was printed on the Ultimaker 2 and the small mask on the Hephestos 2. Both masks were printed on a 0.1mm layer height. We roughened up the small mask with sandpaper afterwards.

Original design: http://www.thingiverse.com/thing:525610

Originally released early 2015, XT-CF20 has been a hit since day one. We have found a lot of practical uses for this stiff material, like printing parts for a bike, an RC Truggy car and even parts of our recently released F1 scale model. However, one feature that has been commented on before is the beautiful matte finish that XT-CF20 brings. In short, XT-CF20 is a functional material with stunning looks.

XT-CF20 is an abrasive material wearing out a brass nozzle quite fast. For the print made with the Ultimaker 2 we used the new Olsson Ruby nozzle, generously provided by 3DVerkstan, our distributor in the Nordic region and manufacturer of the nozzle. In the words of Daniel Ljungstig, CEO of 3DVerkstan: “After more then 10 months of testing, we are happy to target a November release of this exciting upgrade for desktop 3D Printing. The Olsson Ruby is a high-tech nozzle with a carefully designed ruby tip, which makes it have unique properties. The ruby nozzle is designed by Anders Olsson, inventor of the popular Olsson Block that is also part of the Ultimaker 2+ 3D Printers. He designed it to be able to print extremely hard materials for scientific research at Uppsala University in Sweden.”

During our test printing the mask we have seen quite some benefits over the regular brass nozzles that are the current industry standard: The ruby nozzle retains the excellent heat conducting properties of brass, while being extremely resistant to wear. This means that you can print your standard materials as usual, but also very abrasive materials such as XT-CF20 and steelFill. Daniel Ljungstig adds: “In addition to this, many of our test users have reported an improved surface quality compared to standard nozzles.”

The Olsson Ruby will be available in November 2016.

The small mask was printed on the Hephestos 2 with the regular brass nozzle provided with the printer.

colorFabb’s XT-CF20 is available in both 750 grams and 2.2kg spools. Click here to see the availabilty.

3d printing colorfabb death gun desu gan hephestos 2 mask olsson ruby nozzle ultimaker xt-cf20

Detailed balustrade

On the Ultimaker forums we found this very fine example of a highly detailed print, made with our nGen 3D printing filament. Made by Ultimaker user FoxDenDNF it was printed with a .25mm nozzle. The pegs are only 14mm tall and 2.2mm at their widest point.

This model was printed on an Ultimaker 2 Extended with an Olsson block at 0.1mm layer height and it took approx. 4-6 hours. This print is part of the Tempietto model which can be found on Thingiverse: http://www.thingiverse.com/thing:968928

The Tempietto is part of the San Pietro in Montorio church which is located in Rome. FoxDenDNF has mentioned in the original post that he currently printing the entire model and we cannot wait to see the final result!

You can find the original post here: https://ultimaker.com/en/community/prints/2647-printing-colorfabb-ngen-with-a-25mm-nozzle

FoxDenDNF used nGen Dark Blue, but we have 16 other colors (including clear to choose from). You can check the availability online. All items are in stock and ship within 24 hours on business days.

Printing in high resolutions and with great detail is no problem with nGen. nGen is made with Eastman Amphora AM3300 and has good flow properties through the printer nozzle – even at lower temperatures than some other polymers require. These properties make nGen more workable at a wider breadth of temperatures, producing reliable results and resulting in less waste. nGen exhibits advanced overhang ability, excellent looks and large printing temperature range.

3d printing balustrade church colorfabb dark blue detailed model ngen olsson block tempietto ultimaker

Grease Jar

Sometimes you just need a little bit of grease in the print lab, but you have to keep it somewhere. That’s why we’ve chosen to print our own grease jar. We used nGen Gray Metallic for this, due to its excellent chemical resistance, which is a feature of all our co-polyesters.

The design can be found here: https://www.youmagine.com/designs/grease-jar

This grease jar has been printed on an Ultimaker 2 at 45mm/s

We offer nGen in 17 different colors, which are available here: http://colorfabb.com/co-polyesters/ngen

nGen Gray Metallic is on sale this week (until September 25th).

nGen is made from Eastman Amphora™ AM3300 3D polymer. Like colorFabb_XT, it is part of Eastman’s Amphora range of copolyesters for 3D printing. nGen is a low-odor, styrene-free material uniquely suited for 3D printing enthusiasts, particularly those who need the flexibility to print within a wide processing temperature range. With nGen you will have good flow properties through the printer nozzle—even at lower temperatures than some other polymers require. These properties make nGen more workable at a wider breadth of temperatures, producing reliable results and resulting in less waste.

Amphora 3300 has been made into high-quality filament that exhibits advanced overhang ability, excellent looks, and large printing temperature range—empowering large panel of users to create durable and useful items. With the unique combination of a low processing temperature and an elevated temperature resistance, nGen can quickly print creations that are functional, durable, efficient, and attractive. More information can be found on our dedicated landing page: http://ngen.colorfabb.com/

3d printing colorfabb functional gray metallic grease jar ngen sale ultimaker

nGen Saturn V rocket

One of our most active users, Korneel Bullens, approached us earlier this year with the idea to print this huge undertaking, designed by Paul Fischer (aka “farscape1”). You can find the full design on Thingiverse:

http://www.thingiverse.com/thing:911891

The images below were taken at the AM Show in Amsterdam in June 2016 where the rocket was featured.

Korneel Bullens has one of the most active hubs on 3D Hubs in the Netherlands and came to us with the idea to print the entire rocket with our, then, brand new nGen filament. In Korneel’s own words:

“When nGen was launched and news reached us of the Additive Manufacturing Europe show which was to be held in the home country of colorFabb, it was clear something big had to be done.. and what better way to celebrate a launch then to print the object where many had failed.. A Saturn V rocket with launch platform and gantry. The model was released to Thingiverse at the end of July 2015 and since then, this is the second actual complete print and build of this immense model. What better way to illustrate the launch of a great new filament then with the launch vehicle that brought us the Apollo Space Program?

nGen was the material of choice because of its flexibility, durability, ease of printing and lack of warping. Since this build consists of both huge parts as well as very small parts, a material that could cope with all these different materials was found in nGen. The total build took over 3500 hours on a total of 4 Ultimaker 2+ printers, 1 of them being a Ultimaker 2+ Extended.”

You can find out more about Korneel’s hub here:

https://www.3dhubs.com/utrecht/hubs/korneel

The entire rocket is printed with colorFabb’s nGen, made with Amphora™ AM3300 polymer by Eastman Chemical Company.

We have released an initial portfolio of 17 varieties (16 colors and one clear filament) in both diameters.

After the AM Show, the Saturn V rocket got a home in our office:

3d printing am show bullens colorfabb featured korneel ngen rocket saturn v ultimaker

Rocket ship printed with nGen filamant

On the Ultimaker forum Joel Mongeon posted his version of the gCreate rocket ship, printed with nGen. In his words:

A spaceship printed and painted for my toddler who loves “wockets”!

This is the gCreate rocket that can be downloaded here: http://www.gcreate.com/#!3d-model—gcreate-rocket/c1k6o

Printed with Colorfabb nGen. I cut off the tip of the rocket and used a hot tool to round it off. I then used a lot (maybe too much) XTC 3D to smooth the layer lines and add strength to the print. Finally used some shiny metallic paint and a layer of shellac to seal the deal.

Settings used:

3D printer: Ultimaker 2+

Nozzle diameter: 0.40 mm

Layer resolution: 81-100 micron

Print time: 24-48 hours

You can find the original post here: https://ultimaker.com/en/community/prints/4985-rocketship

More information about nGen here: http://ngen.colorfabb.com/

3d printing colorfabb gcreate ngen rocket ultimaker