Updated: XT-CF20 has been added as well!
We are proud to announce that two of our filaments have been added to the Ultimaker Market Place. By adding both Color on Demand ( PLA ) and woodFill to the market place it is easier than ever to start printing with the right settings on Ultimaker printers. How? Download the latest version of Cura (3.6) and add the profiles as detailed in the short video below:
Our filaments have always been tested on Ultimaker 3D printers ever since the beginning. In fact, the very idea of colorFabb started with an Ultimaker Original and it was the first printer we tested on back in 2012. Fun fact: that printer is still in our print lab. We have added more printers to our test lab ever since and have made sure that every major Ultimaker release was added to it as well: The Ultimaker 2, 2+, 3 and S5 are all part of our standard range of printers to ensure our filaments work as flawless as possible on these highly popular Dutch printers.
We’re joining an ever expanding range of premium material brands in the market place.
Update December 14th: We are happy to announce that XT-CF20 has been added to the list as well. Simply add the profile the same way as described above to make functional prints that need extra stiffness.
CARBON FIBER IS ABRASIVE: A special point of attention is the abrasive nature of the carbon fibers. In general these fibers will accelerate the nozzle-wear of brass nozzles, much faster than unfilled filaments. Therefore we recommend to use hardened steel nozzles for this material.
Will more materials be added? Probably in due time. But rest assured that, as mentioned above, we have tested all of our materials on the Ultimaker printers at our disposal. One can also choose Ultimaker materials as a starting point (like CPE settings for our colorFabb_XT and CPE+ for colorFabb_HT). We also share the settings of most of our materials on dedicated blogs, like:
Still not sure if you’re on the right track? Contact us at email@example.com so we can help you further!
Good to know !
What about the other product ? please build the success story until the end…… 🙂