brassFill

In the past year we have launched quite a few new filaments: PA-CF Low Warp, nGen_LUX, PA Neat and of course our Color on Demand. As more filaments enter our portfolio we sometimes have to make the hard decision to discontinue a product as well. This time we have to announce that as from now we will no longer produce brassFill.

 

brassFill was released early 2015 and was the third of our special metal filled filaments after releasing bronzeFill andf copperFill the year before. Although we have seen excellent prints made with brassFill it was always a more more demanding material to print with and not for the faint of heart.

Due to the increased pricing compared with the other metal filled filaments it was priced higher and combined with the fact the filament was at times quite a challenge it never became as popular as the other special filaments.

Earlier this summer we were faced with the choice to either invest in new stock or to discontinue brassFill. Since popularity has been declining we made the hard decision to convert the remaining raw material that we had and call it quits after that. Although we are sure that brassFill has quite a few fans, we see this as a necessary move.

We have already sold out the 1.75mm filaments and the remaining stock of 2.85mm filament is the last we have produced. You can check the current stock here.

This is your last chance to order brassFill! #

colorFabb remains commited to bring you a wide range of 3D printing filaments that allow users worldwide unique aesthetical and functional qualities. Check out our catalogue for the full range of filaments.

 

Sir Fill bids brassFill farewell. Design: https://www.thingiverse.com/thing:501831

 

# At the time of writing, see date on the top of this blog. Resellers and distributors may have limited stock.

Pumpkin

Tis the season to be scary. It’s Halloween and you will see many pumpkins today, many of them real, lots of them printed and only one of them printed with RAL 2000 Yellow Orange – a perfectly suited color which is part of our Color on Demand program.

Design: https://www.thingiverse.com/thing:167043

Designed by MakieLab it is a great scary pumpkin for Halloween. We printed it on the Ultimaker 2+ using standard PLA settings at 0.2mm layer height.

With launched Color on Demand we re-invented the way makers can choose colors. No longer you are bound to the colors that have been pre-selected by filament manufacturers anymore. Now you can order the color you actually need and want.

We have already matched over 100 RAL colors, which can easily be ordered online. Click here to see our collection. You can order as from one 750 grams spool! If we have not matched your favorite color, request it by using our online form. Starting from a 2kg spool we match the specific color you want, based on RAL, other well-known color references or a physical reference.

With Color on Demand you can say “yes” to that print job which needs a specific color or a look you have been waiting for. Stun your colleagues, family or other makers with your prints. You could already print one-of-a-kind designs, now you can also make them look unique!

Check out more recent Color on Demand prints by clicking here. Make sure you read our color disclaimer. Want to know more about Color on Demand, check our our FAQ page.

Our Color on Demand experience room, still under construction, with all the RAL colors we matched… so far.

How does it work?

Once an order is placed the team of specialists at colorFabb then go to work to start matching this color request if is a new color. You can opt to receive an injected molded plaque to verify the color first, before the spool is produced. This is optional. If the color has already been matched, we plan production right away.
Expected lead times are:

Color on Demand is produced on spools containing either 2kg or 750 grams. The 750 grams option is only available for colors already matched. All new colors are produced on 2kg spools only. Curious about the spool size? Check out this post.
But we do not stop there. At the same time Color on Demand is being offered for granulates as an extra supply option besides filament.

Important: If you order a Color on Demand spool, as well as regular stocked products, we will ship these together as one shipment.

How is color matching being done?

Check our disclaimer! We use the RAL Classic references as our guide. All filaments produced are optically checked by our specialized production and QA team. You can order an injected molded plaque before commiting to order a full spool. Please check in the webshop!

Please be aware that we use the actual RAL reference. Colors on a computer screen, printed images and promotional art can give a misrepresentation of the actual color. Injection molded color plaques can be ordered for a quality check before ordering a full spool.

If the color is then accepted production will be planned. Whenever a color has been matched, it will be added to the colorFabb website for future references.Pricing is as low as € 75 (ex VAT / shipping) for a 2kg spool of custom made filament, with tier pricing available: 10% discount when 4 spools are purchased, 20% when 10 spools are purchased.

Color on Demand is a first new step into the direction of customization of filaments for the end users. Starting with PLA and RAL, the possibilities to expand to other materials and color references are plenty and will be implemented at a later stage.Basically, color on demand will enable the maker / 3D Printer user to pinpoint specific projects and claim a different position in the supply chain with exactly that color that is requested.

Users can send your requests to colorFabb or visit our website:

More questions that need answering? Contact us through sales@colorfabb.com

Dual color frog

Printing with multiple colors has been around for a while now. We have put the Ultimaker 3 in our print lab to good use to print the 2-Color Tree Frog by Nervous System.

 

Design: https://www.thingiverse.com/thing:329436

As described on the Thingiverse page: “This treefrog is based on a recently discovered species called the Tiger’s Treefrog (Hyloscirtus tigrinus) which has an incredible maze-like pattern on its skin. Hyloscirtus tigrinus lives in the rainforests of Ecuador and Colombia and is exceedingly rare. Scientists estimate there are only 250 adult tiger’s treefrogs alive today.”

We used Color on Demand colors RAL 4001 (Red Lilac) and RAL 6037 (Pure Green) to create a one-of-a-kind print.

 

On the Ultimaker 3 we used standard PLA settings and printer with a 0.4mm nozzle at a 0.22mm layer height.

In June we launched Color on Demand and re-invented the way makers can choose colors. No longer you are bound to the colors that have been pre-selected by filament manufacturers anymore. Now you can order the color you actually need and want.

We have already matched many RAL colors, which can easily be ordered online. Click here to see our collection. You can order as little as a 750 grams spool! If we have not matched your favorite color, request it by using our online form. Starting from a 2kg spool we match the color you want.

With Color on Demand you can say “yes” to that print job which needs a specific color or a look you have been waiting for. Stun your colleagues, family or other makers with your prints. You could already print one-of-a-kind designs, now you can also make them look unique!

Check out more recent Color on Demand prints by clicking here.

Read our color disclaimer. Want to know more about Color on Demand, check our our FAQ page.

 

How does it work?

Once an order is placed the team of specialists at colorFabb then go to work to start matching this color request if is a new color. You can opt to receive an injected molded plaque to verify the color first, before the spool is produced. This is optional. If the color has already been matched, we plan production right away.
Expected lead times are:

Color on Demand is produced on spools containing either 2kg or 750 grams. The 750 grams option is only available for colors already matched. All new colors are produced on 2kg spools only. Curious about the spool size? Check out this post.
But we do not stop there. At the same time Color on Demand is being offered for granulates as an extra supply option besides filament.

Important: If you order a Color on Demand spool, as well as regular stocked products, we will ship these together as one shipment.

How is color matching being done?

Check our disclaimer! We use the RAL Classic references as our guide. All filaments produced are optically checked by our specialized production and QA team. You can order an injected molded plaque before commiting to order a full spool. Please check in the webshop!

Please be aware that we use the actual RAL reference. Colors on a computer screen, printed images and promotional art can give a misrepresentation of the actual color. Injection molded color plaques can be ordered for a quality check before ordering a full spool.

If the color is then accepted production will be planned. Whenever a color has been matched, it will be added to the colorFabb website for future references.Pricing is as low as € 75 (ex VAT / shipping) for a 2kg spool of custom made filament, with tier pricing available: 10% discount when 4 spools are purchased, 20% when 10 spools are purchased.

Color on Demand is a first new step into the direction of customization of filaments for the end users. Starting with PLA and RAL, the possibilities to expand to other materials and color references are plenty and will be implemented at a later stage.Basically, color on demand will enable the maker / 3D Printer user to pinpoint specific projects and claim a different position in the supply chain with exactly that color that is requested.

Users can send your requests to colorFabb or visit our website:

More questions that need answering? Contact us through sales@colorfabb.com

Current Sale!

Have you checked out our current sales? All value packs with 10% discount! Click here or on the image below:

10% off on a good deal already makes a pretty great deal altogether! There is nothing else you have to do (no coupon code or anything). Just click the link or the image above and the 10% discount is already calculated when you check out.

Not looking for bulk purchases? We also have at least 15% discount on our black and white filaments. Click here to go to our Sales Page directly or on the image below:

Both these discounts do not work in combination with other discounts.

Phone holder

We like our desk gadgets and one of the most essential gadgets must be the phone holder. We found a very convenient one: The Flat-Pack Phone Stand by Robert Stockton. The clever design allows for the stand to be easily taken apart and carried with you.

Design: https://www.thingiverse.com/thing:3127804

The base is printed as two pieces which snap together, though you’ll probably want to use glue to keep the assembly as tight as possible. All parts print flat on the bed with 45-degree bevels, so no supports, rafts, or brims should be needed. – From Thingiverse

We printed the phone holder with PLA RAL 3020 Traffic Red, which was developed for our Color on Demand service, on the Ultimaker 2+ at a 0.2mm layer height and using a 0.4mm nozzle.

 

In June we launched Color on Demand and re-invented the way makers can choose colors. No longer you are bound to the colors that have been pre-selected by filament manufacturers anymore. Now you can order the color you actually need and want.

We have already matched many RAL colors, which can easily be ordered online. Click here to see our collection. You can order as little as a 750 grams spool! If we have not matched your favorite color, request it by using our online form. Starting from a 2kg spool we match the color you want.

With Color on Demand you can say “yes” to that print job which needs a specific color or a look you have been waiting for. Stun your colleagues, family or other makers with your prints. You could already print one-of-a-kind designs, now you can also make them look unique!

Check out more recent Color on Demand prints by clicking here.

Read our color disclaimer. Want to know more about Color on Demand, check our our FAQ page.

 

How does it work?

Once an order is placed the team of specialists at colorFabb then go to work to start matching this color request if is a new color. You can opt to receive an injected molded plaque to verify the color first, before the spool is produced. This is optional. If the color has already been matched, we plan production right away.
Expected lead times are:

Color on Demand is produced on spools containing either 2kg or 750 grams. The 750 grams option is only available for colors already matched. All new colors are produced on 2kg spools only. Curious about the spool size? Check out this post.
But we do not stop there. At the same time Color on Demand is being offered for granulates as an extra supply option besides filament.

Important: If you order a Color on Demand spool, as well as regular stocked products, we will ship these together as one shipment.

How is color matching being done?

Check our disclaimer! We use the RAL Classic references as our guide. All filaments produced are optically checked by our specialized production and QA team. You can order an injected molded plaque before commiting to order a full spool. Please check in the webshop!

Please be aware that we use the actual RAL reference. Colors on a computer screen, printed images and promotional art can give a misrepresentation of the actual color. Injection molded color plaques can be ordered for a quality check before ordering a full spool.

If the color is then accepted production will be planned. Whenever a color has been matched, it will be added to the colorFabb website for future references.Pricing is as low as € 75 (ex VAT / shipping) for a 2kg spool of custom made filament, with tier pricing available: 10% discount when 4 spools are purchased, 20% when 10 spools are purchased.

Color on Demand is a first new step into the direction of customization of filaments for the end users. Starting with PLA and RAL, the possibilities to expand to other materials and color references are plenty and will be implemented at a later stage.Basically, color on demand will enable the maker / 3D Printer user to pinpoint specific projects and claim a different position in the supply chain with exactly that color that is requested.

Users can send your requests to colorFabb or visit our website:

More questions that need answering? Contact us through sales@colorfabb.com

Stacker XL for investment casting

Using 3D printing in investment casting reduces cost and adds flexibility to the process. PLA is a natural choice for this process where the entire print is burned out. What started thousands of years ago with beeswax has now evolved to patterns made with 3D printing. The printed pattern is coated with ceramic, then the printed pattern is burned or melted out and the metal poured into remaining shell leaving a complete casting. We have posted about this process before and will explore it in more depth here.

This was an endurance test for our Stacker S4 XL: one full week of printing. We started the print on Friday August 3d and removed the print from the platform this very morning, August 10th.

The support structure was removed very easily, despite it having a large flat surface area which connects with the model. The support structure released in one piece, after carefully prying the support structure away from the model. The setting used were:

  • 0.2mm layer height
  • 0.4mm nozzle
  • approx. 2.5kg of filament

This casing for a gear box was designed by Muralidhar M and posted on Grabcad on November 17th, 2016

For small series, or one off products creating a mold is not a cost effective solution for foundry companies. 3D printing on the other hand presents several advantages enabling foundries to make single parts or even small series.

Instead of investing in tooling, foundry companies can choose to 3D print their patterns in a material suited for investment casting. ColorFabb PLA/PHA Natural is a material uniquily suited for investment casting. It’s an easy printing material capable of creating complex shapes with great smooth surface finish and will work with most desktop and industrial type FFF 3D printing machines.

The material decomposes at 600C and ensures a clean burnout leaving behind a clean mold ready for casting.

 

Cut down on development time

Skipping the tooling development step saves a huge amount of time. Typically this could shorten the time to a first metal casted part by 3-4 weeks. Not being dependent on a third party mold supplier also reduces risk in time sensitive projects.

We recently printed another weeklong print, made on the Stacker XL:

As many of you know, we are the distributor of Stacker 3D printers in Europe. We have been working with Stacker ever since their first prototype and now have several in our print lab. In the past 5 years we have seen 3D printing emerging from a hobby market to more professional uses. A lot of our users are using 3D printing to make a living or at least support their business in one way or another. We recently published two blogs about Dutch companies Optima and Mifa and their use of Stacker 3D printers.

The Stacker printers are industrial grade FFF 3D printers. Multiple print heads and a large build volume make them versatile printers. Small series production or large scale prototyping are no problem for the Stacker printers! This Minneapolis, USA, based manufacturer produces highly reliable printers and is a perfect match for any professional looking for serious 3D printing. You can find the full product specifications on our dedicated Stacker page (S4 XL will be added soon).

The Stacker S4 XL has a bigger build volume than its smaller siblings and other advantages:

 

  • Huge Build Volume 610 x 610 x 610mm (24 x 24 x 24″)
  • Closed loop servos for ZERO lost steps
  • Compatible with Stacker’s Direct Direct drive extruder
  • Four Print Heads for 4X print speeds
  • High Precision Linear Motion
  • Amazing Print Quality
  • Works with almost any Filament

 

For Stacker the term “industrial grade” is not a hollow marketing term. It means their printers are designed for extra long service life, extremely low maintenance and that the printer will maintain its positional accuracy throughout its life cycle. This printer has been designed to be used in a professional environment, be it for large prototypes or small series production.

Interested? Get a quote or contact us!

Flower

Days are getting shorter, weather is getting worse & leaves are falling from the trees. We thought it was the right time to print Maz’s Flower with no less than three Color on Demand colors:

 

Design: https://www.thingiverse.com/thing:2782116

The parts were printed on both an Ultimaker 2+ and a Prusa i3 MK2. With both printers we used a 0.2mm layer height and a 0.4mm nozzle. As for the colors, we opted for three very suitable colors, initially made on request through our Color on Demand service: RAL 3005 Wine Red, RAL 4004 Claret Violet and RAL 6002 Leaf Green.

 

In June we launched Color on Demand and re-invented the way makers can choose colors. No longer you are bound to the colors that have been pre-selected by filament manufacturers anymore. Now you can order the color you actually need and want.

We have already matched many RAL colors, which can easily be ordered online. Click here to see our collection. You can order as little as a 750 grams spool! If we have not matched your favorite color, request it by using our online form. Starting from a 2kg spool we match the color you want.

With Color on Demand you can say “yes” to that print job which needs a specific color or a look you have been waiting for. Stun your colleagues, family or other makers with your prints. You could already print one-of-a-kind designs, now you can also make them look unique!

Check out more recent Color on Demand prints by clicking here.

Read our color disclaimer. Want to know more about Color on Demand, check our our FAQ page.

How does it work?

Once an order is placed the team of specialists at colorFabb then go to work to start matching this color request if is a new color. You can opt to receive an injected molded plaque to verify the color first, before the spool is produced. This is optional. If the color has already been matched, we plan production right away.
Expected lead times are:

Color on Demand is produced on spools containing either 2kg or 750 grams. The 750 grams option is only available for colors already matched. All new colors are produced on 2kg spools only. Curious about the spool size? Check out this post.
But we do not stop there. At the same time Color on Demand is being offered for granulates as an extra supply option besides filament.

Important: If you order a Color on Demand spool, as well as regular stocked products, we will ship these together as one shipment.

How is color matching being done?

Check our disclaimer! We use the RAL Classic references as our guide. All filaments produced are optically checked by our specialized production and QA team. You can order an injected molded plaque before commiting to order a full spool. Please check in the webshop!

Please be aware that we use the actual RAL reference. Colors on a computer screen, printed images and promotional art can give a misrepresentation of the actual color. Injection molded color plaques can be ordered for a quality check before ordering a full spool.

If the color is then accepted production will be planned. Whenever a color has been matched, it will be added to the colorFabb website for future references.Pricing is as low as € 75 (ex VAT / shipping) for a 2kg spool of custom made filament, with tier pricing available: 10% discount when 4 spools are purchased, 20% when 10 spools are purchased.

Color on Demand is a first new step into the direction of customization of filaments for the end users. Starting with PLA and RAL, the possibilities to expand to other materials and color references are plenty and will be implemented at a later stage.Basically, color on demand will enable the maker / 3D Printer user to pinpoint specific projects and claim a different position in the supply chain with exactly that color that is requested.

Users can send your requests to colorFabb or visit our website:

More questions that need answering? Contact us through sales@colorfabb.com

Pens

Since we have launched Color on Demand earlier this summer we have received many requests, orders and feedback from our customers. One of these customer is Batch.Works, a London based company specialized in production on a small scale. You should definitely check out their website here. We caught up with CEO Julien Vaissieres during the TCT Show recently and he brought a gift for us: customized pens with the colorFabb name and logo in it:

 

Design pens by Batch.Works

Design pen holder: https://www.thingiverse.com/thing:1670728

The colors were custom made for Batch.Works and they produced the pens, which are commercially available. Check their website for the details.

We could not leave the pens just lying around and printed a small holder for them (not unlike a katana holder). We printed in a very cool and neutral RAL 9010 Pure White – also a Color on Demand color – on the Ultimaker 2 with a 0.2mm layer height, a 0.4mm nozzle and without support.

Batch.Works saw the potential of Color on Demand to make custom products. As they state on their website: “We make 3D printed consumer products part of people’s everyday lives. We believe in making the right product for the right person, in the right place; using the latest technology to make local design and manufacturing globally available.”

Have a look at their video:

 

In June we launched Color on Demand and re-invented the way makers can choose colors. No longer you are bound to the colors that have been pre-selected by filament manufacturers anymore. Now you can order the color you actually need and want.

We have already matched many RAL colors, which can easily be ordered online. Click here to see our collection. You can order as little as a 750 grams spool! If we have not matched your favorite color, request it by using our online form. Starting from a 2kg spool we match the color you want.

With Color on Demand you can say “yes” to that print job which needs a specific color or a look you have been waiting for. Stun your colleagues, family or other makers with your prints. You could already print one-of-a-kind designs, now you can also make them look unique!

Check out more recent Color on Demand prints by clicking here.

Read our color disclaimer. Want to know more about Color on Demand, check our our FAQ page.

 

How does it work?

Once an order is placed the team of specialists at colorFabb then go to work to start matching this color request if is a new color. You can opt to receive an injected molded plaque to verify the color first, before the spool is produced. This is optional. If the color has already been matched, we plan production right away.
Expected lead times are:

Color on Demand is produced on spools containing either 2kg or 750 grams. The 750 grams option is only available for colors already matched. All new colors are produced on 2kg spools only. Curious about the spool size? Check out this post.
But we do not stop there. At the same time Color on Demand is being offered for granulates as an extra supply option besides filament.

Important: If you order a Color on Demand spool, as well as regular stocked products, we will ship these together as one shipment.

How is color matching being done?

Check our disclaimer! We use the RAL Classic references as our guide. All filaments produced are optically checked by our specialized production and QA team. You can order an injected molded plaque before commiting to order a full spool. Please check in the webshop!

Please be aware that we use the actual RAL reference. Colors on a computer screen, printed images and promotional art can give a misrepresentation of the actual color. Injection molded color plaques can be ordered for a quality check before ordering a full spool.

If the color is then accepted production will be planned. Whenever a color has been matched, it will be added to the colorFabb website for future references.Pricing is as low as € 75 (ex VAT / shipping) for a 2kg spool of custom made filament, with tier pricing available: 10% discount when 4 spools are purchased, 20% when 10 spools are purchased.

 

Color on Demand is a first new step into the direction of customization of filaments for the end users. Starting with PLA and RAL, the possibilities to expand to other materials and color references are plenty and will be implemented at a later stage.Basically, color on demand will enable the maker / 3D Printer user to pinpoint specific projects and claim a different position in the supply chain with exactly that color that is requested.

Users can send your requests to colorFabb or visit our website:

More questions that need answering? Contact us through sales@colorfabb.com

Cryptex

If you ever feel the need to go full Dan Brown, but lack the necessary myths and conspiracy theories we recommend the print a Cryptex to ensure any secret (past or present) is safe. We used the Letter-Cryptex by Hiob and went wild with unique Color on Demand colors!

Design: https://www.thingiverse.com/thing:3090603

All parts were printed on the Ultimaker 2+ with standard PLA settings and we used 13 unique Color on Demand colors and PLA Economy Black to make this print:

The cryptex is an excellent design to showcase a lot of colors which we can with our brand new Color on Demand service. We have already matched hundreds of colors and have nearly one hundred RAL references matched an available online.

In June we launched Color on Demand and re-invented the way makers can choose colors. No longer you are bound to the colors that have been pre-selected by filament manufacturers anymore. Now you can order the color you actually need and want.

We have already matched many RAL colors, which can easily be ordered online. Click here to see our collection. You can order as little as a 750 grams spool! If we have not matched your favorite color, request it by using our online form. Starting from a 2kg spool we match the color you want.

With Color on Demand you can say “yes” to that print job which needs a specific color or a look you have been waiting for. Stun your colleagues, family or other makers with your prints. You could already print one-of-a-kind designs, now you can also make them look unique!

Check out more recent Color on Demand prints by clicking here.

Read our color disclaimer. Want to know more about Color on Demand, check our our FAQ page.

 

How does it work?

Once an order is placed the team of specialists at colorFabb then go to work to start matching this color request if is a new color. You can opt to receive an injected molded plaque to verify the color first, before the spool is produced. This is optional. If the color has already been matched, we plan production right away.
Expected lead times are:

Color on Demand is produced on spools containing either 2kg or 750 grams. The 750 grams option is only available for colors already matched. All new colors are produced on 2kg spools only. Curious about the spool size? Check out this post.
But we do not stop there. At the same time Color on Demand is being offered for granulates as an extra supply option besides filament.

Important: If you order a Color on Demand spool, as well as regular stocked products, we will ship these together as one shipment.

How is color matching being done?

Check our disclaimer! We use the RAL Classic references as our guide. All filaments produced are optically checked by our specialized production and QA team. You can order an injected molded plaque before commiting to order a full spool. Please check in the webshop!

Please be aware that we use the actual RAL reference. Colors on a computer screen, printed images and promotional art can give a misrepresentation of the actual color. Injection molded color plaques can be ordered for a quality check before ordering a full spool.

If the color is then accepted production will be planned. Whenever a color has been matched, it will be added to the colorFabb website for future references.Pricing is as low as € 75 (ex VAT / shipping) for a 2kg spool of custom made filament, with tier pricing available: 10% discount when 4 spools are purchased, 20% when 10 spools are purchased.

Color on Demand is a first new step into the direction of customization of filaments for the end users. Starting with PLA and RAL, the possibilities to expand to other materials and color references are plenty and will be implemented at a later stage.Basically, color on demand will enable the maker / 3D Printer user to pinpoint specific projects and claim a different position in the supply chain with exactly that color that is requested.

Users can send your requests to colorFabb or visit our website:

More questions that need answering? Contact us through sales@colorfabb.com

PARIS lamp

Ah Paris… City of Light. Fittingly, we printed the PARIS Lamp which was designed in… Paris by Le Fabshop. For the filament we used two colors from our Color on Demand program:

Design: https://www.thingiverse.com/thing:1134611

The design was inspired by the Eiffel Tower’s structure (you may probably have seen it somewhere before). The inspiration came to Samuel N. Bernier after the terrible November 2015 attacks in Paris. He states: “My way to fight these barbarians is to keep celebrating what they hate. History, liberty, art and love of beauty on earth.”

It was designed to printed in parts, fitting most desktop printers and without support. An awesome job and true to the spirit of the city.

The PARIS Lamp was made on the Creality CR-10 using standard PLA settings. The material is PLA and the colors used are RAL 7015 Slate Grey (lampshade) and RAL 7013 Brown Grey (lamp holder and ring).

These are only two of the hundreds of colors we have already matched for our customers.

 

In June we launched Color on Demand and re-invented the way makers can choose colors. No longer you are bound to the colors that have been pre-selected by filament manufacturers anymore. Now you can order the color you actually need and want.

We have already matched many RAL colors, which can easily be ordered online. Click here to see our collection. You can order as little as a 750 grams spool! If we have not matched your favorite color, request it by using our online form. Starting from a 2kg spool we match the color you want.

With Color on Demand you can say “yes” to that print job which needs a specific color or a look you have been waiting for. Stun your colleagues, family or other makers with your prints. You could already print one-of-a-kind designs, now you can also make them look unique!

Check out more recent Color on Demand prints by clicking here.

Read our color disclaimer. Want to know more about Color on Demand, check our our FAQ page.

 

How does it work?

Once an order is placed the team of specialists at colorFabb then go to work to start matching this color request if is a new color. You can opt to receive an injected molded plaque to verify the color first, before the spool is produced. This is optional. If the color has already been matched, we plan production right away.
Expected lead times are:

Color on Demand is produced on spools containing either 2kg or 750 grams. The 750 grams option is only available for colors already matched. All new colors are produced on 2kg spools only. Curious about the spool size? Check out this post.
But we do not stop there. At the same time Color on Demand is being offered for granulates as an extra supply option besides filament.

Important: If you order a Color on Demand spool, as well as regular stocked products, we will ship these together as one shipment.

 

How is color matching being done?

Check our disclaimer! We use the RAL Classic references as our guide. All filaments produced are optically checked by our specialized production and QA team. You can order an injected molded plaque before commiting to order a full spool. Please check in the webshop!

Please be aware that we use the actual RAL reference. Colors on a computer screen, printed images and promotional art can give a misrepresentation of the actual color. Injection molded color plaques can be ordered for a quality check before ordering a full spool.

If the color is then accepted production will be planned. Whenever a color has been matched, it will be added to the colorFabb website for future references.Pricing is as low as € 75 (ex VAT / shipping) for a 2kg spool of custom made filament, with tier pricing available: 10% discount when 4 spools are purchased, 20% when 10 spools are purchased.

Color on Demand is a first new step into the direction of customization of filaments for the end users. Starting with PLA and RAL, the possibilities to expand to other materials and color references are plenty and will be implemented at a later stage.Basically, color on demand will enable the maker / 3D Printer user to pinpoint specific projects and claim a different position in the supply chain with exactly that color that is requested.

Users can send your requests to colorFabb or visit our website:

More questions that need answering? Contact us through sales@colorfabb.com