Dodecahedron with colorFabb nGen

Today’s print, straight from our own print lab, is the Rhombic Dodecahedron Derived Figure by Fred Bartels, which we printed entirely with our all-round nGen filament.

dodecahedron-2

Design by Fred Bartels: http://www.thingiverse.com/thing:539489

We used the Delta Tower in our print lab to achieve the build height of 40cm for this print and printed with a 0.2mm layer height. This work of art is perfectly suited for our nGen filament and we selected the stunning light blue color for this print.

Printing high resolution is no problem with nGen. With good performance on overhanging surfaces and great stability during print we think this makes nGen a great all-round filament for every day use.

nGen is made from Eastman Amphora™ AM3300 3D polymer. Like colorFabb_XT, colorFabb_HT and nGen_FLEX, it is part of Eastman’s Amphora range of copolyesters for 3D printing. Find more about co-polyesters, what they are and what the advantages are by visiting our previous blog.

nGen is a low-odor, styrene-free material uniquely suited for 3D printing enthusiasts, particularly those who need the flexibility to print within a wide processing temperature range. With nGen you will have good flow properties through the printer nozzle—even at lower temperatures than some other polymers require. These properties make nGen more workable at a wider breadth of temperatures, producing reliable results and resulting in less waste.

img_9985

Amphora 3300 has been made into high-quality filament that exhibits advanced overhang ability, excellent looks, and large printing temperature range—empowering large panel of users to create durable and useful items. With the unique combination of a low processing temperature and an elevated temperature resistance, nGen can quickly print creations that are functional, durable, efficient, and attractive.

 

You can find more information about nGen by clicking here. nGen is available in 17 colors.

Learn more about printing with nGen by visiting our tutorial.

 

Rubber band powered boat

We printed a rubber band powered boat with nGen Orange and Light Blue on the Leapfrog HS.

img_5260

Design can be found here: http://www.thingiverse.com/make:254456

nGen is a great material to print toys with. For toys we need materials with great colors and good stable mechanical properties. nGen comes in 17 colors. Because of nGen’s good mechanical properties parts will last a long time. Printing high resolution is no problem with nGen. With good performance on overhanging surfaces and great stability during printint we think this makes nGen a great material to create your own creations.

You can find more information on the dedicated nGen landing page. nGen is now available and in stock in our webshop.

With Amphora, items can be created that are more functional, more durable, more efficient, and attractive.

img_5264

nGen is made with Eastman Amphora™ 3D polymer AM3300 and is a low-odor, styrene-free choice that is uniquely suited for 3D printing applications. It has good flow properties through the printer nozzle – even at lower temperatures than some other polymers require. These properties make nGen more workable at a wider breadth of temperatures, producing reliable results and resulting in less waste.

You can find all relevant data sheets here: http://colorfabb.com/Materials/

TCT Show 2016 recap

Hi all,

We wrapped up the TCT Show 2016. Packed our goods, stacked them on the pallets and everything is heading back to colorFabb HQ again soon. We’re about to board our plane and leave Birmingham once more. It has been a great two days in Birmingham, meeting old friends and making new ones. We were there with our partners Stacker and Eastman Chemical Company, answering all your questions, showing the prints and the printers and giving away a lot of free samples of our co-polyesters.


img_5139

Two true artists dropped by: Steve Cox and Tony Short. They brought us their finest prints to showcase at our booth. Steve brought a statue, printed with bronzeFill and manually polished:

img_5133

Also, Tony Short dropped by and gave us a fantastic present: a gift box based on the colorFabb logo. You can see it for yourself. This gift is much appreciated and will get a special place at the office.

img_5140

As we said, true artists who not only know how to print, but how to post-process to achieve the highest quality possible.

Of course we had a big announcement at the beginning of the show. We launched nGen_FLEX this week and the initial reactions at show were extremely positive. Our new flexible filament has a Tg of over 125 degrees and is extremely well suited for engineering parts and prosthetics. Based on a co-polyester from Eastman, you can be assured of the high quality of the material. We have created a dedicated landing page for nGen_FLEX, which you can reach by clicking here.

We recently sent a few people spools to test nGen_FLEX and we saw an overwhelming support for our latest filament. Here are a few mentions of our beta testers:

screen-shot-2016-09-29-at-22-17-58

screen-shot-2016-09-29-at-22-16-08

screen-shot-2016-09-29-at-22-14-15

Layer adhesion is great and you can use this semi-flexible material with a Bowden tube, which we showed while printing on an Ultimaker 2+ with nGen_FLEX continuously during the show.

cthitxsxgaa39yo

nGen_FLEX is now available in black and dark gray.

The one feature print everybody talked about was the OpenRC F1 Car, designed by Daniel Norée, we published about last week. If you missed it, you can catch up here. We printed the entire car (a full 107cm long) with co-polyester based filaments: nGen, colorFabb_XT, colorFabb_HT, XT-CF20 and of course our latest nGen_FLEX which we used for the tires.

img_5115

The F1 car was mostly printed on the Stacker S4 during the summer. We had the Stacker on site during the TCT, printing technical parts – 4 at the same time! The Stacker S4 is a perfect printer for large scale projects and small series production. You can find more information by visiting our website: http://stacker.colorfabb.com/

stacker

A final honorable mention goes out to the team of Creat3D, our UK distributor. They built a big colorFabb tower at their stand!

pile

We want to thank everybody who visited us or followed the TCT Show through social media. Special thanks to Ludovic and Richard from Eastman, as well as Norston from Stacker to man the stand with us during these two busy days. It was great meeting everybody again and are too many to mention.

We hope to see you again next year!

(Oh, and don’t forget: the 10% discount code in our webshop will be valid the entire weekend. Use TCT2016 as the coupon code for a 10% discount on all spools of filament!)

Detailed balustrade

On the Ultimaker forums we found this very fine example of a highly detailed print, made with our nGen 3D printing filament. Made by Ultimaker user FoxDenDNF it was printed with a .25mm nozzle. The pegs are only 14mm tall and 2.2mm at their widest point.

_dsc0029_smaller

This model was printed on an Ultimaker 2 Extended with an Olsson block at 0.1mm layer height and it took approx. 4-6 hours. This print is part of the Tempietto model which can be found on Thingiverse: http://www.thingiverse.com/thing:968928

The Tempietto is part of the San Pietro in Montorio church which is located in Rome. FoxDenDNF has mentioned in the original post that he currently printing the entire model and we cannot wait to see the final result!

You can find the original post here: https://ultimaker.com/en/community/prints/2647-printing-colorfabb-ngen-with-a-25mm-nozzle

FoxDenDNF used nGen Dark Blue, but we have 16 other colors (including clear to choose from). You can check the availability online. All items are in stock and ship within 24 hours on business days.

Printing in high resolutions and with great detail is no problem with nGen. nGen is made with Eastman Amphora AM3300 and has good flow properties through the printer nozzle – even at lower temperatures than some other polymers require. These properties make nGen more workable at a wider breadth of temperatures, producing reliable results and resulting in less waste. nGen exhibits advanced overhang ability, excellent looks and large printing temperature range.

OpenRC F1 project release

Earlier this year we came across the new design Daniel Norée made: an F1 car, his follow-up to the OpenRC Truggy design we had printed previously. “After a bit of thinking I came to the conclusion that a Formula 1 car would probably a perfect follow up project to the Truggy!” says Daniel NoréeHence, the OpenRC Formula 1 car was born.

As he stepped up his game we felt we had to step up ours as well. First of all we set our print engineer Jos Deelen at work with scaling up the design to 250%. When it came to a choice of materials we didn’t have to think for very long: co-polyesters. Which one? All of them. We found that different parts had different requirements and with nGen, colorFabb_XT, colorFabb_HTXT-CF20 and our brand new nGen_FLEX. we almost had all our bases covered. If you want to know more about co-polyesters, click here for a blog we posted this summer explaining these great materials we developed with Eastman Chemical Company.

The tyres were made with our new nGen_FLEX filament, released during the TCT Show om September 28th 2016. You can read all about our new semi-flexible filament here: https://learn.colorfabb.com/ngen_flex/

We have published the 250% scaled files on Thingiverse: Thing:1834126. On Thingiverse you can find all the files as well as a more detailed description about how to build your own 1m long OpenRC Formula 1 car. The helmet used in the driver seat is Thing:170222.

We are very proud of the result:

openrc_f1_shoot-5

openrc_f1_shoot-4

“I learned alot from the OpenRC Truggy and i wanted to use what i had learned in the new project,”  Daniel told us. His aim was to design a car with a simpler design and without the hard-to-source parts. According to Daniel, another important part was the material: “While many failed on the Truggy due to the need of hard to print materials like Polycarbonate and it´s likes this time materials like PLA or Co-Polyesters should do the job.” 

He spent a couple of intense weeks in Fusion 360 CAD designing the F1 and the result was introduced at a trade fair in Sweden together with Autodesk.

Although Daniel aimed to make a simpler design, the sheer size of the F1 car was a great challenge to get it right. And we did get it right. Due to the size of several parts we used the Stacker S4 printer for the bulk of the print work with great results. It measures a full 107cm from the front to the end. Using all the functional materials (old, new and upcoming…) we had at our disposal we completed the job and recently we took the car out for a test drive.

You can see the results below:

The F1 car will be on display at the TCT Show next week where you can find us at stand B36, running the co-polyester filaments on the Stacker S4.

You can find more about our co-polyesters on our dedicated landing pages for nGen and colorFabb_HT. Our colorFabb_XT, nGen, colorFabb_HT and XT-CF20 are available online.

Follow Daniel Norée’s work and especially his Open RC project here: http://danielnoree.com/?cat=6

Get a quote for the Stacker S4! For the USA, click here. For Europe, click here.

openrc_f1_shoot-2

 

openrc_f1_shoot

Grease Jar

Sometimes you just need a little bit of grease in the print lab, but you have to keep it somewhere. That’s why we’ve chosen to print our own grease jar. We used nGen Gray Metallic for this, due to its excellent chemical resistance, which is a feature of all our co-polyesters.

grease_jar_ngen-2

The design can be found here: https://www.youmagine.com/designs/grease-jar

This grease jar has been printed on an Ultimaker 2 at 45mm/s

We offer nGen in 17 different colors, which are available here: http://colorfabb.com/co-polyesters/ngen

nGen Gray Metallic is on sale this week (until September 25th).

grease_jar_ngen

nGen is made from Eastman Amphora™ AM3300 3D polymer. Like colorFabb_XT, it is part of Eastman’s Amphora range of copolyesters for 3D printing. nGen is a low-odor, styrene-free material uniquely suited for 3D printing enthusiasts, particularly those who need the flexibility to print within a wide processing temperature range. With nGen you will have good flow properties through the printer nozzle—even at lower temperatures than some other polymers require. These properties make nGen more workable at a wider breadth of temperatures, producing reliable results and resulting in less waste.

 Amphora 3300 has been made into high-quality filament that exhibits advanced overhang ability, excellent looks, and large printing temperature range—empowering large panel of users to create durable and useful items. With the unique combination of a low processing temperature and an elevated temperature resistance, nGen can quickly print creations that are functional, durable, efficient, and attractive. More information can be found on our dedicated landing page: http://ngen.colorfabb.com/

RC 180 degree HD camera printed with nGen

Today’s featured print is a great one that has already been used extensively in the real world and is printed with nGen. Thes prints were made by Claus Forster, who works for Eastman Specialty Plastics. Eastman is of course the producer of the Amphora™ 3D polymer, so Claus knows the material on which nGen is based very well!

To find out more about co-polyesters, please check our previous blog explaining these materials.

This is an Arduino activated remote controlled 180 degree HD camera which has been modified. The aim was to make videos during a motorbike tour in the highest French Alpine mountains during driving in direction forward, sidewise and backwards. Beside that an easy fix and release via hook and loop fastener provided a comfortable handling and the camera fits exactly into a helmet. Because of this the camera could even be covered/hidden by the helmet during parking or break and sometimes the helmet was the ‘transport-box’ when taking it off during the night.

20160912_114524

An Arduino Nano (open-source electronic prototyping platform) controls the RGB-LED – shows the status of the camera – and the rotating – done by a RC-servo – and operates the camera – switching on and  start/stops recording. All electronics – remote, interface, Arduino – is soldered on a 50x70mm board.

20160912_114537

These parts were entirely printed with nGen. nGen is made with Eastman Amphora™ 3D polymer AM3300 and has good flow properties through the printer nozzle – even at lower temperatures than some other polymers require. These properties make nGen more workable at a wider breadth of temperatures, producing reliable results and resulting in less waste. nGen exhibits advanced overhang ability, excellent looks, and large printing temperature range—empowering large panel of users to create durable and useful items.

The hardware was done early this year but the functional 3D parts were printed just one week before the trip:

  • Bottom and brackets for the electronic board (1)
  • Housing with LED and RC servo (2)
  • Dome for camera – front (3)
  • Dome for camera – rear (4)
  • Sender/Control battery operated (5)
  • Adapter for camera on motorbike (6)
  • Adapter for sender on the handlebar  (7)

motcam_allparts_rear

The camera even passed an unplanned drop test of 1.2 meters! You can see the camera in action here:

More information about nGen can be found here: http://ngen.colorfabb.com/ 

nGen is available now in a variety of 17 colors: http://colorfabb.com/co-polyesters/ngen

nGen Saturn V rocket

One of our most active users, Korneel Bullens, approached us earlier this year with the idea to print this huge undertaking, designed by Paul Fischer (aka “farscape1”). You can find the full design on Thingiverse:

http://www.thingiverse.com/thing:911891

The images below were taken at the AM Show in Amsterdam in June 2016 where the rocket was featured.

ngen-saturn

Korneel Bullens has one of the most active hubs on 3D Hubs in the Netherlands and came to us with the idea to print the entire rocket with our, then, brand new nGen filament. In Korneel’s own words:

“When nGen was launched and news reached us of the Additive Manufacturing Europe show which was to be held in the home country of colorFabb, it was clear something big had to be done.. and what better way to celebrate a launch then to print the object where many had failed.. A Saturn V rocket with launch platform and gantry. The model was released to Thingiverse at the end of July 2015 and since then, this is the second actual complete print and build of this immense model. What better way to illustrate the launch of a great new filament then with the launch vehicle that brought us the Apollo Space Program?

nGen was the material of choice because of its flexibility, durability, ease of printing and lack of warping. Since this build consists of both huge parts as well as very small parts, a material that could cope with all these different materials was found in nGen. The total build took over 3500 hours on a total of 4 Ultimaker 2+ printers, 1 of them being a Ultimaker 2+ Extended.” 

13522747_643109149171004_4245340260352282805_o

You can find out more about Korneel’s hub here: 

https://www.3dhubs.com/utrecht/hubs/korneel 

The entire rocket is printed with colorFabb’s nGen, made with Amphora™ AM3300 polymer by Eastman Chemical Company. 

nGen is a low-odor, styrene-free material uniquely suited for 3D printing enthusiasts, particularly those who need the flexibility to print within a wide processing temperature range. With nGen you will have good flow properties through the printer nozzle—even at lower temperatures than some other polymers require. These properties make nGen more workable at a wider breadth of temperatures, producing reliable results and resulting in less waste.

 Amphora 3300 has been made into high-quality filament that exhibits advanced overhang ability, excellent looks, and large printing temperature range—empowering large panel of users to create durable and useful items. With the unique combination of a low processing temperature and an elevated temperature resistance, nGen can quickly print creations that are functional, durable, efficient, and attractive.

We have released an initial portfolio of 17 varieties (16 colors and one clear filament) in both diameters.

After the AM Show, the Saturn V rocket got a home in our office:

13558596_644494895699096_8563812248536509163_o

nGen Flowerpots

We printed MakeMike’s “Molcajete”flowerpots on the Leapfrog HS with fantastic results. Splendid prints for use in house which will brighten up your flowers even further!

ngen_leapfroghs_1920-2

Design: http://www.thingiverse.com/thing:796667

Material: nGen Orange & Gold Metallic

nGen is available now in a variety of 17 colors: http://colorfabb.com/co-polyesters/ngen

Machine: Leapfrog Creatr HS

Layerheight: 0.16mm

 

About nGen

nGen is made from Eastman Amphora™ AM3300 3D polymer. Like colorFabb_XT, it is part of Eastman’s Amphora range of copolyesters for 3D printing.

nGen is a low-odor, styrene-free material uniquely suited for 3D printing enthusiasts, particularly those who need the flexibility to print within a wide processing temperature range. With nGen you will have good flow properties through the printer nozzle—even at lower temperatures than some other polymers require. These properties make nGen more workable at a wider breadth of temperatures, producing reliable results and resulting in less waste.

Amphora 3300 has been made into high-quality filament that exhibits advanced overhang ability, excellent looks, and large printing temperature range—empowering large panel of users to create durable and useful items. With the unique combination of a low processing temperature and an elevated temperature resistance, nGen can quickly print creations that are functional, durable, efficient, and attractive.

ngen_leapfroghs_1920

The Astronaut

We have printed the Astronaut by The Sculptor not once, but twice. We have chosen both corkFill and nGen for this print. Beautiful materials for the best aesthetics.

Design: http://www.thingiverse.com/thing:1755130

img_9997

Settings for corkFill on the Ultimaker 2:

0.1mm layer height on 220C, heated bed platform on 50 degrees C and 100% fan.

corkFill: http://colorfabb.com/corkfill

nGen: http://colorfabb.com/co-polyesters/ngen

img_9999-2