Today’s featured print is a great one that has already been used extensively in the real world and is printed with nGen. Thes prints were made by Claus Forster, who works for Eastman Specialty Plastics. Eastman is of course the producer of the Amphora™ 3D polymer, so Claus knows the material on which nGen is based very well!
To find out more about co-polyesters, please check our previous blog explaining these materials.
This is an Arduino activated remote controlled 180 degree HD camera which has been modified. The aim was to make videos during a motorbike tour in the highest French Alpine mountains during driving in direction forward, sidewise and backwards. Beside that an easy fix and release via hook and loop fastener provided a comfortable handling and the camera fits exactly into a helmet. Because of this the camera could even be covered/hidden by the helmet during parking or break and sometimes the helmet was the ‘transport-box’ when taking it off during the night.
An Arduino Nano (open-source electronic prototyping platform) controls the RGB-LED – shows the status of the camera – and the rotating – done by a RC-servo – and operates the camera – switching on and start/stops recording. All electronics – remote, interface, Arduino – is soldered on a 50x70mm board.
These parts were entirely printed with nGen. nGen is made with Eastman Amphora™ 3D polymer AM3300 and has good flow properties through the printer nozzle – even at lower temperatures than some other polymers require. These properties make nGen more workable at a wider breadth of temperatures, producing reliable results and resulting in less waste. nGen exhibits advanced overhang ability, excellent looks, and large printing temperature range—empowering large panel of users to create durable and useful items.
The hardware was done early this year but the functional 3D parts were printed just one week before the trip:
- Bottom and brackets for the electronic board (1)
- Housing with LED and RC servo (2)
- Dome for camera – front (3)
- Dome for camera – rear (4)
- Sender/Control battery operated (5)
- Adapter for camera on motorbike (6)
- Adapter for sender on the handlebar (7)
The camera even passed an unplanned drop test of 1.2 meters! You can see the camera in action here:
More information about nGen can be found here: http://ngen.colorfabb.com/
nGen is available now in a variety of 17 colors: http://colorfabb.com/co-polyesters/ngen