Recently we released PA-CF Low Warp. This is a filament developed with one single purpose and that’s to create functional prints on a wide range of 3D printers. For today’s print we move further into the DIY world by printing a router attachment for a rotary tool, the Dremel in this case.

Original design: https://www.thingiverse.com/thing:17105

Designed by Lenbok, we printed this part of the Ultimaker 2+ with a 0.8mm Olsson Ruby nozzle. We chose 0.2mm layer height and printed at 260C nozzle temp. As the designer says on his Thingiverse page: “Screw this puppy onto your dremel, adjust your bit depth, and route away to your heart’s content.”

As the name indicates, PA-CF Low Warp is a polyamide (nylon) with carbon fiber. An added bonus is that, unlike many other engineering grade filaments, it has very little warping when printing large objects! Low infill prints come out perfectly flat on cold bed for higher infill prints 40/50C temperature is enough to obtain flat prints. It is an engineering grade filament for a wide range of printers and users alike.

We have printed a lot with PA-CF Low Warp recently. Below are a few examples:

As said, functionality is key with this filament and it is a material that suits the needs of the professional user perfectly.

The PA-CF Low Warp is a one of a kind polyamide formulation with the ability to print nearly warp free on non heated buildplatforms. Low infill prints come out perfectly flat on cold bed for higher infill prints 40/50C temperature is enough to obtain flat prints.

PA-CF Low Warp allows continuous use at 120°C while retaining sufficient properties for the intended application. Most high heat resistant materials will be difficult to print and require heated chambers and / or heated platforms to keep parts from warping the bottom layer. PA-CF Low Warp shows a very low tendency to warp, even at ambient temperature platform.

PA-CF Low Warp is a material that has a lot of practical applications. One of them is within the automotive industry. The unique combination of high strength, good temperature resistance and good chemical stability makes this material a good choice for parts in and around the car. It’s used a lot already for brackets and covers.
In general it can be used for functional prototyping and final part manufacturing. For functional prototyping users are often looking for materials which have good toughness, strength and resistance to abrasion. Because of the excellent mechanical strength and heat resistance het material can even be considers for use in final applications. PA-CF low warp has great dimensional stability, because of extremely low warp. The material is therefor unique suited for applications such as jigs & fixtures which require parts with accurate dimensions.

Eager to get started? Click here to get the basics on how to print with PA_CF Low Warp.

PA-CF Low Warp is available now in our webshop and ships from stock.

 

The Olsson Ruby Nozzle – One nozzle for all materials

Due to the abrassive nature of the filament we recommend the use of hardened nozzles for the best performance of the material and printer. For this reason we are offering the Olsson Ruby Nozzles with the purchase of PA-CF Low Warp. You can find the combined offer here.

We have published about the use of the Olsson Ruby Nozzle before and we are very enthusiastic about the use of this filament combined with abrassive materials like PA-CF Low Warp, but also XT-CF20 and steelFill.

The ruby mounted at the tip assures that even the toughest materials will be printable. It was originally designed for printing with a composite of Boron Carbide (B4C), the third hardest known material in the world. Since most of the Olsson Ruby is made from brass, with its excellent heat conductivity, performance and throughput is first-class.

This nozzle, soon on your printer!

The Olsson Ruby is manufactured, assembled and tested in a high-quality facility in Sweden. This is why 3DVerkstan – also colorFabb’s partner in the region – guarantees the very best quality and tolerances.

As from now you can purchase the Olsson Ruby Nozzle 0.4mm in combination with PA-CF Low Warp in our webshop.

Recommended Posts

No comment yet, add your voice below!


Add a Comment

Your email address will not be published. Required fields are marked *