Today’s featured print serves two goals. First of all, we’re always looking to use our filaments to make the best use of it. In this case we have used PLA Economy to make a prototype of a security camera housing. The second purpose was to make our new intern Pierre known with the Ultimaker 2 and Cura slicer software. We can safely say both goals were met.
Designed by Toby Lankford: https://www.thingiverse.com/thing:993974
Working from a design by Toby Lankford, Pierre made this model in 3 days. It was a perfect model for Pierre to get the printer and slicer known and to print multiple parts.
We used this case to welcome our new intern Pierre. This was a perfect project to get to know the Ultimaker 2 and Cura slicer software. Pierre also used a Raspberry Pi to show how the internal parts should be mounted.
Printed on the UM2 with PLA Economy Silver. Everything is printed at 0.2mm layerheight, 210/125C and 60C bed temperature.
We used PLA Economy as it’s perfect for making a first visual model of a new product. For outdoor use we would not advice using PLA Economy if durability is important, but it has proven to be an excellent filament for indoor use and visual prototyping.
Recently added the always popular Dark Blue, which is similar to our very own Ultra Marine Blue that we offer in our portfolio of PLA/PHA filaments.
PLA Economy offers a great value for your money. One spool consists of 2.2kg of filament for a dirt cheap price of a little over € 35 (ex VAT and shipping). It is a different grade than our range of PLA/PHA, but we guarantee the same colorFabb quality. Our filaments are readily available from our webshop.
Here are some print settings to get started:
Adviced 3d printing temperature: 195C-220C
Adviced 3d print speed: 40 – 100 mm/s
Advised Heated bed (if you have one, not strictly necessary): 50-60C
Cooling fan: 100% fan cooling for best aesthetics, this gives best performance on overhangs and small details. For best mechanical performance try printing with the least amount of cooling needed, for optimal layer adhesion.
Or: You can use the standard PLA settings if your printer has these pre-defined and these should work fine.
You can also opt for the PLA Economy Value Pack: order four spools as a value pack and receive an immediate 10% discount!
PLA Economy is very well suited for the maker who needs quality at an affordable price. It is a perfect filament for large volume and small series production, made with the guaranteed colorFabb quality that we are known for.