Christmas Tree

With Christmas around the corner it’s only apt we follow suit with the rest of the world and print a Christmas tree. We chose the design by idig3D for our Christmas print. For the material we chose nGen Green Transparent.


Earlier this year we released no less than six transparent nGen colors:

nGen is of course our go-to filament and available in many colors. It is a true all-round material suitable for most day to day 3D printing activities. At the core of its reliability is the special chemical make-up of the Eastman Amphora™ AM3300 3D polymer, which results in a good melt stability. From pellet to filament to 3D print, nGen retains its material properties very well, meaning more stable results with less waste of time and material.

The Christmas tree was printed on the Ultimaker S5 with a 0.8 AA core nozzle and with a 0.4mm layer height. Nozzle temperature was 240C and the bed temp at 80C. We used the spiral vase mode.

nGen works extremely well on the Ultimaker printers. Find out more on the standard settings we recommend here. But one could make life even easier. Only yesterday we posted that nGen (under it’s raw material name AM3300) has been added to the Ultimaker Market Place, making printing with the right settings even easier!

Learn more about printing nGen on the Ultimaker 3 and S5 here.