Christmas Tree

With Christmas around the corner it’s only apt we follow suit with the rest of the world and print a Christmas tree. We chose the design by idig3D for our Christmas print. For the material we chose nGen Green Transparent.

Design: https://www.thingiverse.com/thing:1913982

Earlier this year we released no less than six transparent nGen colors:



nGen is of course our go-to filament and available in many colors. It is a true all-round material suitable for most day to day 3D printing activities. At the core of its reliability is the special chemical make-up of the Eastman Amphora™ AM3300 3D polymer, which results in a good melt stability. From pellet to filament to 3D print, nGen retains its material properties very well, meaning more stable results with less waste of time and material.

The Christmas tree was printed on the Ultimaker S5 with a 0.8 AA core nozzle and with a 0.4mm layer height. Nozzle temperature was 240C and the bed temp at 80C. We used the spiral vase mode.

nGen works extremely well on the Ultimaker printers. Find out more on the standard settings we recommend here. But one could make life even easier. Only yesterday we posted that nGen (under it’s raw material name AM3300) has been added to the Ultimaker Market Place, making printing with the right settings even easier!

Learn more about printing nGen on the Ultimaker 3 and S5 here.

nGen Transparent Prints

With nGen we offer an all-round 3D printing filament for every day use. One advantage over PLA is its glass temperature (of 85 degrees C, double that of PLA). Another is the special chemical make-up of the base material, Eastman Amphora™ AM3300 3D polymer, which results in a good melt stability. From pellet to filament to 3D print, nGen retains its material properties very well, meaning more stable results with less waste of time and material. Read more on what nGen is. Earlier this year we launched 6 more nGen colors – all of them transparent.

Below are some of the recent prints we made:

All designs by Richie_i3: https://www.thingiverse.com/thing:3028886

All the prints were made in our print lab on the Ultimaker 2+. We used the following settings:

  • Nozzle diameter: 0.8
  • Layerheight: 0.5
  • Nozzle temperature: 240C
  • Bed temperature: 75C
  • Extrusion multiplier: 1.4
  • Vase mode: on

nGen works extremely well on the Ultimaker printers. Find out more on the standard settings we recommend here.

 

Back in March we added 6 transparent colors to our nGen portfolio:

 

 

The colors were added to a rich mix of 17 colors, bringing the total to 23 colors of nGen filament you can choose from and ship from stock! With nGen Transparent colors you can print objects that have a great shine and stand out from the crowd, even from far away.

nGen is a true all-round material suitable for most day to day 3D printing activities. At the core of its reliability is the special chemical make-up of the Eastman Amphora™ AM3300 3D polymer, which results in a good melt stability. From pellet to filament to 3D print, nGen retains its material properties very well, meaning more stable results with less waste of time and material.

It was launched almost 3 years ago and has been a hit ever since. This is not without reason. It is true all-round material suitable for most day to day 3D printing activities. Its chemical make up ensures a very consistent quality. An advantage over PLA is its elevated temperature resistance: 80 degrees instead of 45 degrees, so even in hotter climates (or a hot summer day) the material holds up extremely well. Below is a comparison chart of several of the Amphora based filaments compared to commodity materials like ABS and PLA.

You can read more on our dedicated landing page, our blog about co-polyesters or our most recent blog revisiting this filament.

Our brand new nGen transparent colors are available now in our webshop and ship from stock. Click here to go directly to our webshop. Samples are also available.

 

 

Also available: nGen_LUX, our brand new luxurious high-end filament. Read more about what makes this filament so special here.

nGen Transparent Colors

This season has nGen written all over it. Right after our very successful launch of the long awaited nGen_LUX last week are adding new colors to our “regular” nGen portfolio. And they are all transparent colors!

In the past two years we have had quite some demand for transparent colors in the nGen range. As from today we offer the following colors:

Twisty Vase by TimLParis: https://www.thingiverse.com/thing:1371418

The colors are added to a rich mix of 17 colors, bringing the total to 23 colors of nGen filament you can choose from as from today! With nGen Transparent colors you can print objects that have a great shine and stand out from the crowd, even from far away.

nGen is a true all-round material suitable for most day to day 3D printing activities. At the core of its reliability is the special chemical make-up of the Eastman Amphora™ AM3300 3D polymer, which results in a good melt stability. From pellet to filament to 3D print, nGen retains its material properties very well, meaning more stable results with less waste of time and material.


Poly Bracelet by 3dfactorytlv: https://www.thingiverse.com/thing:415835

It was launched over two years ago and has been a hit ever since. This is not without reason. It is true all-round material suitable for most day to day 3D printing activities. Its chemical make up ensures a very consistent quality. An advantage over PLA is its elevated temperature resistance: 80 degrees instead of 45 degrees, so even in hotter climates (or a hot summer day) the material holds up extremely well. Below is a comparison chart of several of the Amphora based filaments compared to commodity materials like ABS and PLA.

You can read more on our dedicated landing page, our blog about co-polyesters or our most recent blog revisiting this filament.

Our brand new nGen transparent colors are available now in our webshop and ship from stock. Click here to go directly to our webshop. Samples will be available end of next week.

Faceted Bowl and Vase by billbo1958: https://www.thingiverse.com/thing:2230232

 

Also available: nGen_LUX, our brand new luxurious high-end filament. Read more about what makes this filament so special here.