Free Print+ headphone kits

Update: we are all out of Print+ head phone kits. If you order a value pack now you will receive our awesome filament, but not the Print+ kit.

Earlier today we posted the prints we made with the Print+ head phone kits we received last week.

We used woodFill & PETG Economy for one headphone set and nGen Dark Gray for the other one. Of course, with our variety of 3D printing filaments, you can make a lot of combinations and make your headphones truly unique. You can read the original post here.

The casual observer may have noticed that in that very same post we mentioned we ordered 25 kits during the Kickstarter campaign. We used some ourselves, but what to do with the remaining 20+ kits? Hint: we are not going to use them ourselves…

Yours… soon.

We had decided to give them away. To you! With every value pack ordered (with the exception of PLA Economy and PETG Economy) you will get a free Print+ headphone kit! (Retail value: € 35). The value packs that are eligible for getting a free headset kit are:

Update: Please note that the limited amount of headset kits we had available has run out and therefor this promotion has ended. But if you have a Print+ headset please enter our challenge below for a chance to win 4 free spools of colorFabb filaments.

But that’s not all…

We challenge you to print the coolest and most original headphone set with colorFabb filaments! Then post it on social media (Twitter, Facebook or Instagram) and tag us.

Extra points for an original combination of materials and if photographed in a cool real-life environment. The most original entry will receive 4 free spools of colorFabb filament!!

So there it is: order a value pack and receive a free Print+ DIY headset kit you have a serious chance to get 4 free spools of colorFabb filaments as well!

Head to our website & choose the value pack of your choice!

Print+ headphone

After a successful Kickstarter campaign in 2015, the Print+ headphones have finally started shipping! At colorFabb we saw the potential of these DIY headphones immediately and backed the campaign by buying 25 of these headphone kits. We even made one of the headphone a featured print during the launch of our nGen filament:

From our nGen landing page. Print+ headphone printed with nGen Purple

We were also among the first to showcase the Print+ headphones during the 2015 TCT Show in Birmingham:

Source: colorFabb Vine account

Last week we received Print+ DIY Headphone kits. The kit contains all the necessary components such as speakers, cables and a remote. The remaining parts, to customize your headphone and make it truly yours, can be printed after downloading the files from their site. The Kickstarter campaign ended many moons ago, but the kit is available from their site now.

The variety in our colorFabb portfolio allows for some really cool combinations & unique headsets to be printed. Make it yours!

We have printed and assembled two of these headphones. One has been made in woodFill and our brand new PETG Economy Black filament:

Print+ headphone printed with woodFill and PETG Economy

We chose woodFill for the visual quality of the material and PETG Economy since it is strong enough, which is necessary for the headphone frame. The woodFill was printed on the Lulzbot Mini with standard woodFill profile settings (provided by Lulzbot) at 0.2mm layer height and a standard nozzle.

Another headphone was printed with nGen Dark Gray:

And for the other headphone nGen was chosen because of the visual quality and the layer on layer adhesion of the material. Aside from functionality, the nGen portfolio contains the brightest and some unique colors to really stand out.

This nGen print was made Ultimaker 2+ with a 0.4mm nozzle and printed at a 0.2mm layer height.

The Print+ project is not only a very cool idea, it is also a sustainable one. You don’t need to buy new headphones if one part breaks. You print one or two new parts right away! You can read the Print+ vision here or contact them directly if you have any further questions:


About the materials


woodFill was launched in November 2013 during the London 3D Print Show and was our first special filament. Other natural filled special filaments have followed, like bambooFill (which we recently discontinued) and more recently corkFill. Our woodFill has been a hit from day one due to easy processing and its fantastic looks. Added bonus is that your print room smells like a wood shop when printing with woodFill. Check it out online: it has received nothing but 5 star reviews on our site!

PETG Economy

Earlier this month we released PETG Economy, a high quality filament for functional prototyping. It is available exclusively on 2.2kg spools and in three colors: black, white and red. We currently ship from stock and the PETG Economy range is also available as a value pack.


nGen has proven itself to be a very versatile material that can be used for a lot of applications, visual prototyping being one of them! It has become our default, all-round filament for printing all sorts of prototypes and prints just have to look damn good!

nGen is an all-round filament which has many advantages over PLA. The temperature resistance is over 80 degrees C and it works on most printers with a heated build plate.  nGen is a low-odor, styrene-free material uniquely suited for 3D printing enthusiasts, particularly those who need the flexibility to print within a wide processing temperature range.

With nGen you will have good flow properties through the printer nozzle—even at lower temperatures than some other polymers require. These properties make nGen more workable at a wider breadth of temperatures, producing reliable results and resulting in less waste. You can find more information on our dedicated landing page.

Ever since launching in november 2015 (and later in a big way during the CES Show early 2016), nGen has been a bestseller and a material that has been adopted by users worldwide very rapidly.

nGen is available through our webshop and our network of distributors and resellers worldwide as well as our partner Lulzbot.

Speaking of the Lulzbot Mini printer… Did you know we have it available on our website and ship from stock? Better even: we ship for free in Europe and send out two free spools of nGen with the printer!

The LulzBot Mini was built to work out of the box, with no complicated assembly process getting in the way of you creating. Operating the Mini is the same- straightforward software, easy to read documentation and an army of LulzBot enthusiasts eager to help out people getting started. This printer is not only easy. you will still find flexible, industrial strength capacity from this machine.

Read Make Magazine’s review of the Lulzbot Mini here.

The Lulzbot Mini is now available in our webshop at € 1.573 including VAT / € 1.300 excluding VAT.