A 3d printed Shrek Bust modelled by Adam Beamish supplied by MustangDave. Printed in ColorFabb’s Natural PLA/PHA on an Ultimaker 2.
Design by MustangDave
Get the 3d files here
Printed on an Ultimaker 2
- Layerheight 0.12mm
- Print speed 50mm/s
- Printing temperature 210C
[mwi_product sku=”NATUREL”/]
2 Comments
Actually, this was modelled by Adam Beamish and supplied by Mustang Dave.
Hi Geoff, it’s been adjusted in the text! Thanks for the correction 🙂