Car parts made with PA-CF Low Warp

There are as many uses for our filaments as there are 3D printers and users in this world. We love to come across great applications for our materials. Applications we could not think of when we developed and produced the filaments. Or could think of but never thought we would actually see it. Enter John Pham from Brisbane, Australia, who prints car parts with our PA-CF Low Warp filament.

 

3D printed velocity stacks, all images made by John

We came across these prints on Reddit and contacted John about the amazing quality and practical use of his prints.

Check out the original Reddit post!

John considers himself a hobbyist and has printed about 10kg of PA-CF Low Warp. He has declared it his favorite filament so far to use.

Spacer and velocity stacks, aluminium inserts used to add strength to the parts

 

John is a 3D printing enthusiast who happens to love cars. He adds: “I took this opportunity to try design and print as many parts for my modified Mazda MX-5 as possible. My main printer is a modified Tevo Tornado with a E3D Titan Aero hotend/extruder and 0.5 mm NozzleX, I print at 0.2mm and 0.1mm layer height depending on the parts function. My printing material of choice for functional car parts has always been carbon fiber nylon, and in my opinion colorfabb PA-CF produces the best results. Consistent printing results for myself and customers, good strength, excellent resistance to heat, fuels and oils. It also prints very easily, purple gluestick on 55C glass, no warping, flawless supports, excellent surface finish and dimensional accuracy.”

As you can see, John has quite the skills to print with our engineering grade filament. PA-CF Low Warp is a carbon fiber infused polyamide material with the mechanical properties of a PA6 and excellent printability because of extremely low warp.

The material can be printed on desktop FFF 3D printers, which have a temperature range of at least 260°C on the hot-end and the ability to mount an abrasive resistant nozzle. PA-CF Low Warp excels in tensile and impact strength and allows continues use at 120°C while retaining sufficient properties for the intended application. The formulation has been modified to reduce uptake of moisture and it also takes about 4 times longer to reach the saturation point compared to unmodified PA6. This makes PA-CF Low Warp less affected by moisture then most other nylon filaments available in the market.

It’s not only the velocity stacks that John printed: “I’ve used colorfabb PA-CF to print intake velocity stacks, bulkhead plates, side mirror mount, bonnet prop, work jigs, mounting brackets, 3D printer parts, and electrical connector housings.”

Visit John’s blog for more of his work!

PA-CF Low Warp was developed and released two years ago with LEHVOSS Group. The material shows good results when printed at ambient temperature, or cold bed. The advised processing temperature for this material is set between 260C and 280CYou can find more information about the printability of PA-CF Low Warp on our dedicated landing page.

PA-CF Low Warp is available at colorFabb and ships worldwide from stock.

Curious how to print with PA-CF Low Warp? Here is our tutorial!

 


Disclaimer: 3D printing is subject to various factors: material, processing, printer, settings, etc. Using printed parts like car parts or other parts that are used in real life are at the user’s own risk. We recommend expert level printing, like this example, and extensive testing before use. 

Showing 3 comments
  • Radomír
    Reply

    What 3D printer did you use to make your part so smoooooooth? 🙂

  • Philip Sharp
    Reply

    We need a some prototyping done with PA6-CF. Can you do this for us please? If so what information do you require and using format?
    Many thanks
    Phil

    • noah
      Reply

      try us out roadrunner3d

Leave a Comment

Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.

Not readable? Change text. captcha txt

Start typing and press Enter to search