Ever since moving into the new building we have been working to decorate the interior in a uniform way. One thing (of many) is to print the names of the companies: we have already printed the Stacker logo, which is hanging nicely in our print lab and last week we posted about the colorFabb logo proudly hanging on our wall.

This week we have printed the logo for Helian Polymers:

Helian is, of course, the company where it all started for colorFabb. colorFabb started as a project of Helian Polymers. Helian Polymers BV is a young and dynamic company which was founded by Ruud Rouleaux at the end of 2011. In September 2015 the old company Peter Holland BV, that was founded in 1974, was incorporated into Helian Polymers, to combine all masterbatch activity into one company. In 2013 colorFabb started as part of Helian Polymers and became its own legal entity, colorFabb BV, in September 2015.

Helian Polymers is your partner for masterbatches, compounding and also the driving force behind bioplastics.online where small lots of bioplastics can be ordered. You can find the Helian website here and the biolplastics.online website here.

The logo is now on the wall in their office in our mutual building.

For this print job we used two printers: The Stacker S4 and the Ultimaker 2. The material of choice was PLA Economy Silver, similar to the logos we printed for colorFabb and Stacker. It took 3 days to print all the letters and pieces of the logo, with a total use of 1.2kg of filament.

Top-Tip: using some leftover PLA/PHA we printed some spacers for the “leaves of the logo” to ensure the spacing and orientation was right.
This is easily done in most CAD systems by simply sketching with a small offset to the logo and closing the sketch loops with some straight lines.
These spacers can of course be printed with the lowest possible settings and some left-over material and will make your job a lot easier on the more difficult shapes.

We launched PLA Economy in November last year and has been a best seller ever since. We offer 2.2kg filament on a big spool for a little over € 35 (excluding VAT and shipping) at the best colorFabb quality you are used to. We have extensively tested this PLA grade in our print lab. Since this week we offer a fifth color to our portfolio: Dark Blue, which ships now from stock.

Visit our webshop now.