Fully printed vise

Back in the day (September last year) we printed a vise with nGen on the Lulzbot Mini. Although nice it still needed screws. Now we have printed a vise that is 100% 3d-printed – no screw or other piece of hardware is needed to hold the individual pieces together. Pieces clip and snap together easily!

We used colorFabb_XT, nGen and nGen_FLEX for this print.

Design: http://www.thingiverse.com/thing:2064269

The “Yet ANOTHER Machine Vise” is designed by Christoph Laimer a.k.a. TheGoofy from Switzerland. The design was uploaded merely weeks ago, but we found it an excellent model for our various co-polyesters.

We used nGen Yellow, colorFabb_XT Light Blue and nGen_FLEX Black printing this vise.

Remember the “3D-printed Watch with Tourbillon” we printed last year? Same talented designer!

All parts were printed on the Ultimaker 2 and Ultimaker 2+ in our print lab.

 

As Christopher explains on the Thingiverse page:

“Very often people just try to 3d-print common mechanical objects. But the traditional shape of these objects is often not 3d-printable, and if an object was successfully printed, it maybe does not work, or it is not strong enough.

For mechanical objects it is therefore required to adapt the design depending on its future use. If you’re familiar with some CAD-tool, and if your creating designs for 3d-printing. I recommend to think about the special material properties of 3d-printed parts.”

colorFabb_XT is made with Eastman Amphora™ 3D polymer AM1800. Launched in September 2014, it is a fantastic functional engineering material. With colorFabb_XT we achieved to produce a filament that provides good strength and toughness, as well as certain FDA food contact compliances. It has found a wide audience amongst users looking for extra functionality. With a temperature resistance of 75+ degrees, this filament offers (aside from its high strength and very high toughness) odor neutral processing, a styrene free formulation, FDA food contact compliance and BPA (Bisphenol A ) free formulation.

colorFabb_XT was our first co-polyester based filament and we followed it up with nGen , which was released a little over a year ago. It is an all-round filament which has many advantages over, say, a PLA. The temperature resistance is over 80 degrees C and it works on most printers with a heated build plate.

nGen is a low-odor, styrene-free material uniquely suited for 3D printing enthusiasts, particularly those who need the flexibility to print within a wide processing temperature range. With nGen you will have good flow properties through the printer nozzle—even at lower temperatures than some other polymers require. These properties make nGen more workable at a wider breadth of temperatures, producing reliable results and resulting in less waste. Visual prototyping has never been better than with nGen.

nGen_FLEX was released in September 2016 at the TCT Show and is our first semi-flexible material. With a Shore A hardness of 95 it is a material that is ideally suited for functional parts. It is not soft and squishy like other flexible materials in the market, but allows for fast printing and printing on 3D printers using a Bowden tube. nGen_FLEX is a material for users looking for an engineering grade flexible filament with a high temperature resistance (over 120 degrees C) and good chemical resistance.

You can read the initial reception of nGen_FLEX here.

You can find more about what co-polyesters are by clicking here.