Candy dispenser

First world problems arose at the office when candy was lying around freely. First world solutions were found by printing a candy dispenser. Of course it has to stand out anywhere and we just so happened to have the right filament for the job: nGen_LUX

Original design: (no candy included)

Originally designed by HelioxLab, we found it necessary to adjust the reservoir a bit to contain more candy. Because more is always better when candy is involved [citation needed] . For the most parts we used nGen_LUX and for the reservoir regular nGen Clear. All parts were printed on the Ultimaker 2+. The settings used were:

Layerheight: All parts except reservoir were printed at 0.2mm – which already results in a stunning surface quality with nGen_LUX. The reservoir was printed at 0.5mm and with 150% material flow. For the print speed we used the standard nGen speed for the nGen_LUX parts and once again the reservois was the exception; we used 75% of the standard nGen speed for that one.

Printing temperatures were uniform for the entire print. Printing at 240⁰C with the print bed at a comfortable 75⁰C

Yes, printed at 0.2mm layer height.

We used three of five nGen_LUX colors currently available: Star Yellow, Nature Green and Regal Violet.

nGen_LUX is a unique development based on our best-selling co-polyester nGen, made with Eastman Amphora AM3300 3d Polymer. The excellent clarity of the base AM3300 makes this material uniquely suited for the extremely rare pigment used in nGen_LUX. The material uses diffuse reflection to scatter light in all directions. For the eye it’s nearly impossible to spot layering, even at 0.2mm layerheight. nGen_LUX allows users to print visually appealing models without the need of post processing. nGen_LUX features all the characteristics of our regular nGen, good chemical stability, elevated temperature resistance (85C) and thus allows users to print creations that are functional, durable, efficient and attractive.

It is now available in 5 awesome colors:

nGen_LUX is our new standard in how a 3D printed object can look. It is the filament for the users who wants to bring something extraordinary their work. It is the filament that needs to give that added value. The “Lux” not only stands for luxurious – which is definitely the look of the prints – but also refers to the unit of illumination used worldwide. And light is what makes this filament truly special. Believe us when we say that the photos don’t do the prints real justice…



nGen_LUX is the first special filament based on nGen and the second one in our range of co-polyesters after XT-CF20, our carbon fibre enforced filament based on colorFabb_XT. It can be printed with the very same settings as nGen.

Click here to go directly to our webshop. For a bit more information, click here.



Another very cool print we made recently with nGen_LUX is Project Unicorn. Click the image below for the story behind that print!