Icelandscape

A couple of months ago we already showed you how 3D printing can be used to make amazing 3D maps, like we did with the Everest region. Since then we have upped the scale a bit and printed a another 3D map. But a lot bigger. We received a request from a customer who wanted Iceland’s northern coast partially printed. We call the project “Icelandscape”*:

A total of 12 printed parts

The region in question is Ólafsfjörður and the request was to print most of the peninsula as a showcase model to plan and organize hikes and ski trips in the mountains. The elevated coastal region (which is stunning is real life) is a perfect example of how one can print 3D maps. Due to the size we had to cut up the model and print it in 12 parts, which can easily be glued together.

We created the file by using Terrain2STL – a great online application to make your own custom 3D maps. We printed on the Stacker S4 at 0.2mm layer height, using a 0.8mm nozzle and with 7% infill.

The total printing time of Icelandscape was 400+ hours and we used over 18kg of PLA Economy White. The total map measures 190cm x 80cm x 10cm. This is easily the biggest print we have ever done.

For this print we used our trusted PLA Economy, a highly popular filament used for bulk projects by many of our users… and ourselves.

PLA Economy is a fantastic PLA grade which we launched in November of 2016. Initially we released four colors: white, red, black and silver. Recently added the always popular Dark Blue, which is similar to our very own Ultra Marine Blue that we offer in our portfolio of PLA/PHA filaments.

PLA Economy offers a great value for your money. One spool consists of 2.2kg of filament for a dirt cheap price of a little over € 35 (ex VAT and shipping). It is a different grade than our range of PLA/PHA, but we guarantee the same colorFabb quality. Our filaments are readily available from our webshop. You can use the standard PLA settings if your printer has these pre-defined and these should work fine.

You can also opt for the PLA Economy Value Pack: order four spools as a value pack and receive an immediate 10% discount!

Buy PLA Economy                                      Buy PLA Economy Value Pack

PLA Economy is very well suited for the maker who needs quality at an affordable price. It is a perfect filament for large volume and small series production, made with the guaranteed colorFabb quality that we are known for.

 

About Stacker

Both the Stacker S2 and its larger sibling Stacker S4 are industrial grade FFF 3D printers. Recently the even larger Stacker S4 XL was added to the portfolio. Multiple print heads and a large build volume make them versatile printers. Small series production or large scale prototyping are no problem for the Stacker printers! This US based printer is very reliable and is a perfect match for any professional looking for serious 3D printing. You can find the full product specifications on our dedicated Stacker page.

For Stacker the term “industrial grade” is not a hollow marketing term. It means their printers are designed for extra long service life, extremely low maintenance and that the printer will maintain its positional accuracy throughout its life cycle. This printer has been designed to be used in a professional environment, be it for large prototypes or small series production.

The Stacker S2 in the middle

As many of you know, we are the distributor of Stacker 3D printers in Europe. We have been working with Stacker ever since their first prototype and now have several in our print lab. In the past 5 years we have seen 3D printing emerging from a hobby market to more professional uses. A lot of our users are using 3D printing to make a living or at least support their business in one way or another.

Interested? Get a quote or contact us!

 

 

* We like puns…

3D Maps

Another application that 3D printing has made more accessible is the creation of 3D maps. We all have seen the 3D maps at tourist attractions and information centers of mountainous regions. Making these maps is quite expensive. We were recently approached by a customer to look into the possibilities of making a 3D map for the region he is active in. We may publish about that project later, but in the meantime we produced a map of our own, using the full print bed of the Stacker S2 and using PLA Economy White. When choosing a mountainous region to print we settled for nothing less than the mountain range on this planet – the Himalayas to be exact.

The black thread indicates the Everest base camp trek, approximately, and in real life takes about 8 days.

The region printed here is the Sagarmatha National Park in Nepal, the region where one can walk the Everest Base Camp trek. From Lukla airport, at the bottom of the print it takes up to 7 or 8 days to reach base camp – a stunning trek in real life and marked in black on this printed model.

We created the file by using Terrain2STL – a great online application to make your own custom 3D maps. We printed on the Stacker S2 at 0.16mm layer height, using a 0.8mm nozzle. The making of the print took 67 hours, using the full print bed size of the S2.

 

For this print we used our trusted PLA Economy, a highly popular filament used for bulk projects by many of our users… and ourselves.

PLA Economy is a fantastic PLA grade which we launched in November of 2016. Initially we released four colors: white, red, black and silver. Recently added the always popular Dark Blue, which is similar to our very own Ultra Marine Blue that we offer in our portfolio of PLA/PHA filaments.

PLA Economy offers a great value for your money. One spool consists of 2.2kg of filament for a dirt cheap price of a little over € 35 (ex VAT and shipping). It is a different grade than our range of PLA/PHA, but we guarantee the same colorFabb quality. Our filaments are readily available from our webshop. You can use the standard PLA settings if your printer has these pre-defined and these should work fine.

You can also opt for the PLA Economy Value Pack: order four spools as a value pack and receive an immediate 10% discount!

Buy PLA Economy                                      Buy PLA Economy Value Pack

PLA Economy is very well suited for the maker who needs quality at an affordable price. It is a perfect filament for large volume and small series production, made with the guaranteed colorFabb quality that we are known for.

 

About the Stacker

Both the Stacker S2 and its larger sibling Stacker S4 are industrial grade FFF 3D printers. Multiple print heads and a large build volume make them versatile printers. Small series production or large scale prototyping are no problem for the Stacker printers! This US based printer is very reliable and is a perfect match for any professional looking for serious 3D printing. You can find the full product specifications on our dedicated Stacker page.

For Stacker the term “industrial grade” is not a hollow marketing term. It means their printers are designed for extra long service life, extremely low maintenance and that the printer will maintain its positional accuracy throughout its life cycle. This printer has been designed to be used in a professional environment, be it for large prototypes or small series production.

The Stacker S2 in the middle

As many of you know, we are the distributor of Stacker 3D printers in Europe. We have been working with Stacker ever since their first prototype and now have several in our print lab. In the past 5 years we have seen 3D printing emerging from a hobby market to more professional uses. A lot of our users are using 3D printing to make a living or at least support their business in one way or another.

Interested? Get a quote or contact us!