PLA Economy

Today, we are proudly announcing a new range of PLA filament to our portfolio:

colorFabb PLA Economy

colorfabb-pla-economy-3

 

Millennium Falcon design: http://www.thingiverse.com/thing:919475

The new economy line of PLA filaments by colorFabb delivers a good quality PLA filament in four great colors at very reasonable pricing. ColorFabb PLA Economy is not a standard PLA. It has been modified for better layer adhesion and flow properties to get better performance over other basic PLA filaments. Because it’s made with the same processing technology used for other premium colorFabb products, this PLA Economy will be just as reliable.

Economy PLA will be available on 2.2kg spools only, delivering a whopping 740 meters of 1.75mm filament and 270 meters of 2.85mm filament.

We have been testing this material for the better part of the summer and have found this filament a great alternative those customers who need a lot of PLA. We are initially releasing PLA Economy in four colors: White (RAL 9010), Black (RAL 9005, Red (RAL 3020) and Silver (RAL 9023).

Other colors that will be added at a later date.

economy_pla_prints

Adviced 3d printing temperature
195C-220C

Adviced 3d print speed
40 – 100 mm/s

Advised Heated bed (if you have one, not strictly necessary)
50-60C

Cooling fan
100% fan cooling for best aesthetics, this gives best performance on overhangs and small details. For best mechanical performance try printing with the least amount of cooling needed, for optimal layer adhesion.

economy_pla_prints-7

Dragon Skull design: http://www.thingiverse.com/thing:473639

This PLA grade has been tested extensively and is being produced and shipped by the same colorFabb team you are used to so you know we are not compromising on quality. You can rely with this filament on the same high standards that colorFabb is known for.

economy_pla_prints-4_cc

Strawberry design: http://www.thingiverse.com/thing:153548

Twisted Flower pot design: http://www.thingiverse.com/thing:99658

ColorFabb knight design: http://www.thingiverse.com/thing:501831

PLA Economy is not the same grade of PLA as our PLA/PHA. PLA/PHA will remain available as it always was: in both 750 grams and 2.2kg and in a variety of 30 exciting colors.

colorFabb’s PLA Economy is available now for € 42.50 (incl VAT) per 2.2kg spool!

Due to the competitive pricing, PLA Economy spools are not eligible for our current “Buy 4, Pay 3” campaign. This campaign, however, remains valid for the rest of the month of November for all our other spools (but not our samples).

celebrating4years

Wishing you a great week and happy printing!

Team colorFabb

 

 

colorfabb-pla-economy

Design: http://www.thingiverse.com/thing:433119

nGen_FLEX, our new flexible 3D printing filament

Today, on the first day of the TCT Show, we proudly announce and launch our new 3D printing filament:

nGen_FLEX

Heat resistance 125C | FDA compliance | Styrene-free | BPA-free

nGen_FLEX is a new elastomer material added to our existing range of co-polyester functional 3D printing filaments. It is made from Eastman Amphora™ Flex 3D Polymer FL6000 and the fourth filament in our range of Amphora based co-polyester, following colorFabb_XT, nGen and colorFabb_HT.

nGen_FLEX is available for pre-ordering today: Click here. Shipping will commence next week.

It is best described as a semi-flexible material with good printability on most 3D printers eliminating the use for specialized flex extruders. It’s rated at a Shore A hardness level of 95. By adjusting infill and perimeter settings it’s possible to influence how flexible a part should feel after printing.

ngen_flex-2

nGen_FLEX will initially be available in two colors: Dark Gray and Black. Other colors may be released after initial launch including the possibility for skintone colors. Several skintone colors have already be developed and will be on display at the TCT Show this week. nGen_FLEX is a great material to print prosthetics, for instance.

ngen_flex_demonstrators-2

Fingers: http://www.thingiverse.com/thing:387072/#files / Hand and mount: http://www.thingiverse.com/thing:380665

For those who are looking for a durable flexible material to be used in their prototypes, demonstrators or even final parts, look no further. The filament has excellent chemical resistance and extremely high temperature resistance. nGen_FLEX is temperature resistant to about 125C. That means 3D printed objects can be steam sterilized at 121C.

nGen_FLEX is engineered as a semi-flexible materials which allows most users to print at regular print speeds, cutting down build times compared to other very flexible filaments. Also Bowden style 3D printers, 1.75mm and 2.85mm, will be able to push this filament through without much trouble.

You can find many more advantages of this material on our dedicated landing page: http://ngen-flex.colorfabb.com/

Because of its durable nature the material is an excellent choice for making your own tools and clamps. Whether it’s an improvement for your workshop or actual custom made parts for a productionline, this material will be uniquely suited for the job. One project we used nGen_FLEX for this summer was the F1 open RC project. We wanted to print the entire car with co-polyester filament and found nGen_FLEX to be perfect for the tires.

During the summer we have been busy testing this material on several printers. Below you can find the settings of some of these printers. Click on the table to find our more about our recommended settings:

image003

nGen_FLEX is available for pre-ordering now and will start shipping next week. Price for a spool, which contains 650 grams, is € 39.95 (incl. VAT), so that is € 33 excluding VAT for a full spool of filament!

You can find us this week at the TCT Show in Birmingham, where we are showcasing several prints made with nGen_FLEX: the F1 car, the prosthetic hand, several functional parts and a skateboard (the wheels were printed with nGen_FLEX). If you are at the show or near Birmingham, we are in Hall 3A, Stand B36.

ngen_flex_demonstrators