Today we proudly announce the release of PA-CF Low Warp, a carbon fiber infused polyamide material with the mechanical properties of a PA6 and excellent printability because of extremely low warp. This new filament, which will be available for pre-order as from now and will start shipping as soon as tomorrow, is the first material developed under our new partnership with LEHVOSS Group.

The material can be printed on desktop FFF 3D printers, which have a temperature range of at least 260°C on the hot-end and the ability to mount an abrasive resistant nozzle. PA-CF Low Warp excels in tensile and impact strength and allows continues use at 120°C while retaining sufficient properties for the intended application. The formulation has been modified to reduce uptake of moisture and it also takes about 4 times longer to reach the saturation point compared to unmodified PA6. This makes PA-CF Low Warp less affected by moisture then most other nylon filaments available in the market.

The material shows good results when printed at ambient temperature, or cold bed. The advised processing temperature for this material is set between 260C and 280C. You can find more information about the printability of PA-CF Low Warp on our dedicated landing page.

PA-CF low warp is available for pre-order now and will start shipping tomorrow.

Visit our webshop

“The ability to print engineering level materials on any desktop 3D printer is very exciting. In most cases engineering materials can be very challenging to print, but what we’ve seen from our tests on several popular 3D printers is that the PA-CF Low Warp has excellent properties and can even be printed without warping on a build plate at ambient temperature. This is huge value for a material which is known to be difficult to print.”, said Ruud Rouleaux, director at colorFabb B.V.

“We are excited that colorFabb have chosen our materials for their high-performance PA filaments. With our product line LUVOCOM 3F for extrusion based 3D printing we are focusing in high-performance applications. Our materials enable 3D printing to be used not only for the traditional prototyping applications but also for functional parts and series production. Having an improved layer adhesion and reduced warping, coupled with the high-quality filament technology of colorFabb, makes the whole process reliable and repeatable.”  said Thiago Medeiros Araujo, Market Development 3D Printing at LEHVOSS Group.

As with previous materials we have created a dedicated landing page for this filaments, which you can visit here.

About LEHVOSS Group

The LEHVOSS Group, under the management of Lehmann&Voss&Co., is a group of companies that develops, produces and markets chemical and mineral specialities for various industrial clients. Lehmann&Voss&Co., in Hamburg Germany, was founded in 1894.

LUVOCOM® high-performance compounds as well as the 3D printing materials LUVOSINT® and LUVOCOM® 3F extend the range of applications for plastics and ensure that the products produced from them in many industries are able to reliably fulfil their function, even when subject to stringent requirements. The materials with exactly defined properties are based on almost all available thermoplastics and are tailor-made to individual customer requirements.

 

The Olsson Ruby Nozzle – One nozzle for all materials

Due to the abrassive nature of the filament we recommend the use of hardened nozzles for the best performance of the material and printer. For this reason we are offering the Olsson Ruby Nozzles with the purchase of PA-CF Low Warp. You can find the combined offer here.

We have published about the use of the Olsson Ruby Nozzle before and we are very enthusiastic about the use of this filament combined with abrassive materials like PA-CF Low Warp, but also XT-CF20 and steelFill.