Time-Lapse contest summer 2014 – CLOSED

[restabs alignment=”osc-tabs-left” responsive=”false” tabcolor=”#f5f5f5″ seltabcolor=”#009a7b” tabheadcolor=”#000000″ seltabheadcolor=”#fff”  tabhovercolor=”#b2b2b2″] [restab title=”Description” active=”active”]

COLORFABB TIME-LAPSE CONTEST – NOW CLOSED WINNERS WILL BE ANOUNCED 8th AUGUST

Get your camera, laptop and 3d printer ready, it’s time for some time-lapse action! At colorFabb we like time-lapse videos a lot! We try to make at least 2 every week, printing great designs posted on thingiverse or youmagine. A time-lapse allows you to capture the magic of 3d printing one frame at a time, when played back at normal speed time appears to be moving faster and thus lapsing.

You can 3d print anything you want, use any type of 3d printer and material. We’re looking for time-lapses that capture the beauty of 3d printing and do this in an exceptional and clever way.

The winners
We know that making a time-lapse is a lot of work and takes quite a bit of preparation, that’s why we’re rewarding the 1st place winner with a colorFabb Value Pack! The Value Pack retails for 400,- euro excl. tax and allows you to configure 16 spools of filament yourself! The Second place will be rewarded with 4 spools of material and the third gets to select 2 spools of material.

1st – colorFabb Value Pack
2nd – 4 spools of colorFabb 3d printing filament
3rd – 2 spools of colorFabb 3d printing filament

Most views – 2 spools of colorFabb 3d printing filament

*this prize excludes bronzeFill

Download Timelapse Contest Guideline PDF

[/restab] [restab title=”Requirement”]

You must include in your video:

  1. Printer settings and slicer settings so other people can learn from you approach.
  2. Do not forget to acknowledge the original designer of the model you’re printing, if possible link to his work, portfolio or website.
  3. State the material that you’re printing with.
  4. Upload video to youtube with the following tag: „colorFabb Time-Lapse contest”
  5. include „colorFabb” in the title of your youtube video when uploading
  6. Must be uploaded between 25-06-2014 and 25-07-2014.

Print guidelines:
You are free to print anything you like so get those creative juices flowing and think of something amazing to print!

Time-lapse guidelines:
There is only on rule for the time-lapse, it must show a 3d printer 3d printing a model. You can decide yourself how you’re going to show this, surprise us with some original thoughts!

winning designs will be:

  1. original, something we haven’t seen yet.
  2. complex printed parts, showing off your amazing 3d printer.
  3. a quality time-lapse video, take care of composition, timing etc.

most views:
– although we don’t associate number of views with quality or originality, we do want to reward the video with the most views on youtube.

[/restab] [restab title=”Rules”]Entering the competition:
The time-lapse contest is open to everyone except employees, beta-testers, resellers and families of the colorFabb brand. Multiple entries are welcome, team efforts are also more then welcome.

By entering the contest you:

  1. Agree to be bound by the decisions of the judges (Jury).
  2. Warrant that you are eligible to participate.
  3. Warrant that the submission, i.e. time-lapse video, is your original work.
  4. Warrant neither the work nor its use infringes the intellectual property rights (whether a patent, utility model, functional design right, aesthetic design right, trademark, copyright or any other intellectual property right) of any other person.
  5. Are not entitled to any compensation or reimbursement for any costs.
  6. Agree colorFabb and associate resellers have the right to promote all entries.

Submitting an entry
Subscribe to the contest and submit an entry via the following application form:
https://learn.colorfabb.com/time-lapse-contest-summer-2014/

*Only completely filled out entry forms are considered valid for the contest.

Your entry will be posted on https://learn.colorfabb.com/ along with the other entries.

Awarding the winners

The awarded participant is solely liable for the payment of all taxes, duties and other similar measures if imposed on the reward pursuant to the legislation of the country of his/her residence, domicile, citizenship, workplace, or any other criterion of similar nature.

Winners will be contacted by colorFabb staff to check contact information and any other information necessary to receive the award.

Term
This contest wil start on 25-06-2014 and the deadline for submitting entries will be 25-07-2014 After this a 14 day period will allow all entries to be viewed on youtube and collect as many views as possible. In the mean time colorFabb staff jury will decide on the winning entries which will be announced 08-08-2014.

ADDITIONAL INFORMATION

Timelapse:
http://en.wikipedia.org/wiki/Time-lapse_photography

 

[/restab] [restab title=”Entries”]Entries :

[/restab] [restab title=”Winner”]And the winners is :

First of all we need to start this post with a big thank you to all participants of the Time-Lapse contest! Overall we’re impressed with the quality of the videos and the amount of care and attention the contenders have put into their work.

All entries are listed in our youtube playlist which gives a great overview of the various types of 3d printers that are being used nowadays. We’ve seen the new Printrbot Metal but also a few cool RepRap’s and plug-and-play Makerbots and Ultimakers all revealing their print process in a time-lapse.

The winners of the time-lapse contest have been reviewed by Ruud Rouleaux, Sander Strijbos and Gijs Houdijk of the colorFabb team. This wasn’t an easy task since there were so many great entries. The ingredient we were looking for are originality, complex 3d prints and a quality time-lapse video. We think the winners incorporated these elements best and therefore deserve to be the winners of the very first colorFabb challenge!

The Winners


1. Spiral of Life – colorFabb Summer 2014 Timelapse Challenge

2. Busted – From scan to bust with ColorFabb

3. colorFabb Football Match

We also wanted to reward the time-lapse with the most youtube views. At the time of writing this post the most views, not including the 1st, 2nd and 3rd place winners, is [xxx] by:

Albert Einstein 3D printing using colorFabb filament by Printrbot Simple

Once again thank you to all participants! We liked the first challenge so much that we will definitely be organizing another challenge. So expect more opportunities for winning free colorFabb 3d printing filament!

[/restab] [/restabs]

 

Showing 29 comments
  • hanay
    Reply

    Hi, I submitted an video on Friday evening but it hasn’t appeared in the entries yet. Could it be added to the playlist please? http://youtu.be/Y4ZtB3wYFCw

  • ThE_RaY
    Reply

    Hi guys! Have you received my video? http://youtu.be/AkG8M6E3hPM?list=UUc8taca9HE6AnkhyKO4RekA

    • gijshoudijk
      Reply

      Hi, received it and added to the playlist, thanks for the entry!

      • ThE_RaY
        Reply

        Thank you.. Sorry if i went so late but i had discovered the contest only on thursday and had only few hours for print and produce the video 😉 next time i will make it better!

  • Matt Quest
    Reply

    Here is my last minute entry hopefully I made it in time!: http://youtu.be/UKDxW2ge5as

    • Matt Quest
      Reply

      Audio didn’t render… here’s the new link http://youtu.be/X5hOtJ5jI68

      • gijshoudijk
        Reply

        Hi Matt, thanks for the entry, we’ve added it to the playlist!

  • Titus Braber
    Reply

    It took me a while to edit everything, but here it is! Could you add it to the playlist?
    https://www.youtube.com/watch?v=E-K8TKoIJQ0

    • gijshoudijk
      Reply

      Hi Titus, your entry was added to the playlist, thanks!

  • Cremagine labs
    Reply

    Hi I am Tejas Divan. I uploaded a video URL: http://youtu.be/0931JFA_eUo right now but it is not showing in your playlist. Kindly check it.

    • gijshoudijk
      Reply

      Hi Tejas,
      Thank you for the entry! That’s quite a story you made, great work! It’s in the playlist now.

  • Jak9i
    Reply

    Hey I also have a last minute entry https://www.youtube.com/watch?v=YfAZ8aKPXXI

    • gijshoudijk
      Reply

      JI jak9i, we’ve added your entry to playlist!

  • Stan Velijev
    Reply

    Hey, you guys mind adding my entry? http://t.co/6wvEZvkK5m Thanks!

    • gijshoudijk
      Reply

      Hi Stan, the video is added to the playlist!

  • Titus Braber
    Reply

    Does it have to be a photography time lapse, or can it also be a sped up movie? I see both in the descriptions 😉

    • gijshoudijk
      Reply

      Both is fine, just as long as it time appears to be lapsing and capture the process of 3d printing 🙂

  • Lennart Bruggink
    Reply

    Hey Gijs, ik heb er nog een ingestuurd, issie aangekomen? Groet!

    • gijshoudijk
      Reply

      Yes we did! It’s included in the playlist.

  • Lennart Bruggink
    Reply

    Hey Gijs, heb je mijn video ontvangen voor de contest?

  • XYZ Workshop
    Reply

    hmm ya did you receive my 2 time lapses?

    • gijshoudijk
      Reply

      yes we did! It’s in the playlist.

  • MadeInNeverland
    Reply

    I already submit the video, how can I know the confirmation of receipt?

    • gijshoudijk
      Reply

      Hi your video should be shown in the playlist above, if it’s not there contact us at support@colorfabb.com and send the URL once more. Thank you!

pingbacks / trackbacks
  • […] continue our weekend focus on watching 3D printers print stuff, we’ve got the results of ColorFabb’s Time-Lapse Contest, which ran this summer, from June 25th to July 25th. As 3D printing enthusiasts know, a time-lapse […]

  • […] 25th to July 25th, 3D printer filament manufacturer, colorFabb held a contest called the ‘Time-Lapse Contest Summer 2014‘ . Basically the rules were to create a 3D printing time-lapse video. It did not matter what […]

  • […] Yarışma ile ilgili detaylı bilgi için: coloFabb Time-Lapse Contest […]

  • […] Non sapete cos’è ‘time-lapse’? Ve lo spieghiamo tra un attimo. Prima vi diamo qualche informazione pratica sul contest. Come ad esempio che per realizzare un video time-lapse non occorre essere videomaker esperti, ma basterà semplicemente possedere una macchina fotografica, un pc e una stampante 3D. Tutti coloro che decideranno di partecipare al colorFabb time-lapse contest summer 2014 avranno tempo fino al 25 luglio prossimo per consegnare i lavori. Il primo in classifica si aggiudicherà il colorFabb Value Pack, ovvero una confezione contente 16 rocchetti di filamenti per stampanti 3D del valore totale di 484 euro, il secondo vincerà 4 rocchetti e il terzo 2. In ogni caso tutto quello che dovete sapere sul colorfabb time-lapse contest summer 2014 lo potete trovare QUI! […]

Leave a Comment

Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.

Not readable? Change text. captcha txt

Start typing and press Enter to search